INDEX
| No | Title | Author |
|---|---|---|
| 1 | Forming Limit Curves of 1050 Aluminium Sheets | K. Aoki |
| 2 | Forming Limit Curves of 1100 Aluminum Sheets and Effects of Strain Path and Sheet Thickness on the Curves | K. Aoki |
| 3 | Effects of Strain Path and Sheet Thickness on the Forming Limit Curve of 1050 Aluminium Sheet | K. Aoki |
| 4 | Rapidly Solidified Structure and Grain Refinement of Aluminum Containing Titanium | S. Hori |
| 5 | Metastable Phase and Grain Refinement in Rapidly Solidified Al-Zr Alloys | S. Hori |
| 6 | Solidified Structure, Precipitation and Recrystallization Characteristics of Al-Hf Alloys | S. Hori |
| 7 | Phase Decomposition in a Splat-Quenched Al-6% Hf Alloy | S. Hori |
| 8 | Initiation of Fatigue Cracks along Grain Boundaries in Aluminium Bicrystals | F. Inoko |
| 9 | Crystal Boundary Behavior in Pure Al and Al-Si Alloys Bicrystals Grown from Melt | F. Inoko |
| 10 | Initiation of Fatigue Cracks along Primary Slip Bands in Grain Boundary Affected-Resions of Aluminum Isoaxial Bicrystals | F. Inoko |
| 11 | Mössbauer Study of the Vacancy-57Co Interaction in Electron-irradiated Aluminium | Y. Ishida |
| 12 | Electronmicroscopical Identification of Second Phases Precipitated during Recrystallization Annealing of Dilute Al-Fe-Si Alloys | K. Ito |
| 13 | On the Relationship between Ductility and Fracture Toughness in an Al-6.0%Zn-2.5% Alloy | O. Izumi |
| 14 | Strength and Fracture Behavior of Thermomechanically Processed 7N01 Aluminum Alloy | J. Kaneko |
| 15 | Speed Effect in Deep Drawing of Various Aluminum Sheets | K. Kato |
| 16 | High Temperature Deformation of Unidirectionally Solidified Al-Ni Eutectic Alloy | S. Kikuchi |
| 17 | Trend of the Accuracy of Material in Ultra-Precision Machining In Case of VTR Cylinder Materials Requiring Surface Roughness 0.1μm and Roundness 0.2μm |
K. Kishi |
| 18 | Precision in Machining Materials | K. Kishi |
| 19 | Study on the Development of Free-Cutting Aluminium Alloys to Improve Free-Cutting | K. Kishi |
| 20 | Ultra Precision Warking and Machining Materials | K. Kishi |
| 21 | Horizontal Continuous Casting of Aluminium Strip | S. Muromachi |
| 22 | Impedance Measurements of Anodic Oxide Films with a Frequency Response Analyzer | M. Nagayama |
| 23 | The Hydration of Barrier Oxide Films on Aluminium and its Inhibition by Chromate and Phosphate Ions | M. Nagayama |
| 24 | Structure and Density of Anodic Oxide Films Formed on Aluminium in Sulfuric Acid Solution | M. Nagayama |
| 25 | Reaction of Porous Anodic Oxide Films on Aluminum with Hot Water (I.) Effect of Film Thickness and Reaction Time on the Degree of Hydration and Acid-Dissolution Characteristics |
M. Nagayama |
| 26 | Reaction of Porous Anodic Oxide Films on Aluminum with Hot Water (II.) Analysis of Film Structure by Impedance Measurements |
M. Nagayama |
| 27 | Effects of Electrolyte Anions on the Formation of Barrier Type Oxide Films on Aluminum | M. Nagayama |
| 28 | Inverse Segregation in Unidirectionally Solidified Al-Cu Alloy Ingots | A. Ohno |
| 29 | Study of Crystal Rotation in Deformed Layers Produced by Scratching by Means of Precipitate Particles | K. Okada |
| 30 | Resistivity Maximum during Guinier-Preston Zone Formation in an Al-4wt. %Cu Alloy | K. Osamura |
| 31 | Observation of Barrier Layer during ac Electrolytic Colouring of Anodized Aluminium | E. Sato |
| 32 | Evaluation of Corrosion Resistance of Aluminium Anodic Oxide Film by Hunter's Highly Sensitive Method | E. Sato |
| 33 | Structure and Selective Absorptivity of Electrolytic Color-anodized Aluminium Films | E. Sato |
| 34 | On the Application of AE Method to Galvanic Corrosion of 6063 Aluminium Alloy Coupled with Other Metals | E. Sato |
| 35 | Transient Thermal Stresses in an Orthotropic Rectangular Plate with Convective Heat Transfer at Upper and Lower Surfaces |
K. Saito |
| 36 | An Experimental Study on the Diffusive Wear between Tool Steels and Aluminium Alloys | J. Seino |
| 37 | Backscattering Correction for Quantitative Auger Analysis II. Verifications of the Backscattering Factors Through Quantification by AES |
R. Shimizu |
| 38 | Rapid Solidification of Light Metals | P. H. Shingu |
| 39 | Transmission Electron Microscopy Studies on the Oxidation of Aluminum | K. Shinohara |
| 40 | Precipitation of Intermediate and Equilibrium Phases in (α+η)-type Al-Zn-Mg Alloy | H. Suzuki |
| 41 | The Effects of Thermo-mechanical Treatment on Age-hardening Behaviour of Al-1%Mg2Si Base Alloys | S. Tada |
| 42 | Effect of Crystal Orientation on Anodic Oxide Film Growth of Al | S. Tajima |
| 43 | Interaction and Charge Transfer between Vacancy and Solute in Dilute Aluminium Alloys | J. Takamura |
| 44 | Studies on the Metal Flow and Die Shapes in Extrusion of Al-4%Mg Alloy | M. Tokizawa |
| 45 | An Experimental Study on Bearing Shapes for Balancing Metal Flow in Hot Extrusion Extrusion of Aluminum Alloy Plate with a Constant Thickness |
M. Tokizawa |
| 46 | Stress Corrosion Cracking in Welds of Al-Zn-Mg Alloy | K. Uesaki |
| 47 | Effects of Si, Fe Contents and Addition of Mg on the Recrystallized Grain Size of Commercial Purity Al-1%Mn Alloy | H. Yamada |
| 48 | Formation of ETA Alumina by Anodic Oxidation of Aluminum | M. Yamada |
| 49 | Influence of Secondary Drawing after Annealing on Mechanical Properties of Drawn Aluminum Wire | H. Yamamoto |
| 50 | Development of Recrystallization Texture in Drawn Aluminium Wire | H. Yamamoto |
| 51 | Effect of Hydrostatie Pressure on Interdiffusion in an Al-Zn Alloy | T. Yamane |
| 52 | Distribution in Size and Structure of G.P. Zones in Al-Cu Alloys Based on High Resolution Electron Microscopy |
H. Yoshida |
| 53 | Stability of G.P. Zones and Small Precipitates during Irradiation | H. Yoshida |
| 54 | Integral Coloring of Aluminum by AC and DC superimposed Process in an Alkaline Bath | C. Yoshimura |
| 55 | Anodic Oxidation of Aluminum in Monocarbonic Acid Containing Phosphate | C. Yoshimura |
| 56 | Corrosion Behavior of Aluminum and Magnesium in Ethers | C. Yoshimura |