INDEX
| No | Title | Author |
|---|---|---|
| 1 | Quasi-in situ Microscopy of Surface Markings on Aluminum Formed by Fatigue at Elevated Temperatures | T. Endo |
| 2 | Formation Process of Surface Markings during Fatigue of Aluminum at Elevated Temperatures | T. Endo |
| 3 | Effect of Heat Treatment of Hydroxide on the Formation of Composite Oxide Films on Aluminum | R. Furuichi |
| 4 | Anodizing of Aluminum Covered with Hydroxide ―III Effect of Anodizing Temperature on Void Distribution in a Composite Oxide Film― |
R. Furuichi |
| 5 | Microstrural Studies on Tensile Fracture of an Aligned Al-Al3 Ni Eutectic Composite | T. Hasegawa |
| 6 | Strength of Aluminum Alloys Produced by a Mechanical Alloying Process | T. Hasegawa |
| 7 | Pressure Distribution in Rotary Forging Process | M. Hayama |
| 8 | Effect of Cold Rolling on Corrosion Rate of Aluminum in an Alkaline Solution | N. Inakazu |
| 9 | Texture of Melt-spun Al-Mn Based Quasicrystals | H. Ino |
| 10 | Strain-Induced Boundary Migration (SIBM) in Aluminum Bicrystals Each with a 〈211〉 Tilt Boundary | F. Inoko |
| 11 | Formation of Deformation Bands and Recrystallization in Aluminum Single Crystals Tensile-Deformed with a Two-Directionally Movable Apparatus | F. Inoko |
| 12 | HREM of Carbon/Metal and Ceramic/Metal Interfaces in Composite Materials | Y. Ishida |
| 13 | TEM Analysis of Impurity Induced Microstructures in Sintered Aluminium-Nitride Ceramics | Y. Ishida |
| 14 | Structural Analysis of Planar Defects in Wurtzite Type Aluminium Nitride | Y. Ishida |
| 15 | Effects of Solute Atoms on the Evolution of Structural Damage in Ion Irradiated High-Purity Aluminum Alloys | T. Kino |
| 16 | Dynamic Behavior of Bubbles and Blisters in Aluminum during Helium Ion Irradiation in an Electron Microscope | T. Kino |
| 17 | Effect of Scattering Anisotropy on the Surface Resistivity in Aluminum | T. Kino |
| 18 | Scattering Anisotropy of Conduction Electron due to Vacancies in High-Purity Monocrystalline Aluminum | T. Kino |
| 19 | Dagradation Behavior of Carbon Fibers by Molten Aluminum | S. Kohara |
| 20 | High Temperature Deformation of Dispersion Hardened Al-Mg Alloys | M. Koiwa |
| 21 | Creep Behavior of Dispersion-hardened Al-4%Mg Alloy by Mechanical Alloying | K. Matsuura |
| 22 | Creep Behavior of Short Fiber-reinforced Al-Al2O3 Alloys | K. Matsuura |
| 23 | Creep Behavior and Critical Stress of an Al-Al2O3-Zr Alloy | K. Matsuura |
| 24 | Effect of the Tiple Junction on Grain-Bonudary Sliding in Aluminum Tricrystals Aluminum Tricrystals | S. Miura |
| 25 | Shape Bifurcations in the Coarsening of Precipitates in Elastically Constrained Systems | T. Miyazaki |
| 26 | Shape Bifurcations in the Coarsening of Precipitates in Elastically Constrained Systems | T. Miyazaki |
| 27 | Microstructual Development under the Influence of Elastic Energy in Ni-base Alloys Containing γ’precipitates | T. Miyazaki |
| 28 | A New Mechanism of Phase Decomposition in Elastically Constrained Systems | T. Miyazaki |
| 29 | A Statistical Evaluation of the Free Energy of Fe-base Ternary Ordering Alloys | T. Miyazaki |
| 30 | Phase Separations into A2+DO3 Two Phases in Fe-Al-V Ternary Ordering Alloys | T. Miyazaki |
| 31 | Inhomogeneity in a Coherent Precitate Distribution Arising from the Effects of Elastic Interaction Energies | T. Miyazaki |
| 32 | Phase Separation in Fe-Si-V and Fe-Si-Co Ordering Alloys | T. Miyazaki |
| 33 | Computer-aided Studies on the Phase Decomposition based on the Non-linear Diffusion Equation | T. Miyazaki |
| 34 | Metastable Phase Separation in Fe-Al-V Ordering Alloys | T. Miyazaki |
| 35 | Phase Separation in Liquid Quenched Fe-Al-Ge Ordering Alloys | T. Miyazaki |
| 36 | Precipitate Coarsening under the Influence of Elastic Energy in Ni-base Alloys | T. Miyazaki |
| 37 | Grain Refinement of Continuously Cast Aluminum Ingots by Mold Vibration | T. Motegi |
| 38 | Plane Bending Fatigue of Alumina Fiber-reinforced Aluminum Composites at Temperature between 295 and 673 K | Y. Nakayama |
| 39 | Yield Strength of Al-Li Solid Solution Alloys at High Temperatures | M. Nemoto |
| 40 | Formation and Stability of Orowan Loops in Al-Li Single Crystals | M. Nemoto |
| 41 | A Study on the Interface of Carbon-fiber-reinforced Aluminum Composite Materials | A. Okura |
| 42 | Boron Nitride Coating on Boron Fibers | A. Okura |
| 43 | Mechanical Properties and Structures of Al-Cu Alloys Produced by Heated Mold Continuous Casting Method(OCC) | A. Ohno |
| 44 | Effect of a Sudden Temperature Increase on the Creep of Aluminum at High Temperatures | H. Oikawa |
| 45 | Instantaneous Strain upon Sudden Stress Changes during Steady-State Creep of Dilute Al-Mg Alloys | H. Oikawa |
| 46 | High Temperature Creep of a Rapidly-Solidified Al-8Fe-2Mn Alloy | M. Otsuka |
| 47 | High Temperature Creep of a P/M Al-8Fe-2Mo Alloy | M. Otsuka |
| 48 | Cavitation in the Superplastic Deformation of the Al-Li-Cu-Mg-Zr Alloy | M. Otsuka |
| 49 | Characteristics of Acoustic Emission Induced by the Thermoelastic Phase Transformation in Cu-Al-Ni Alloy Single Crystals | K. Sakamaki |
| 50 | Source Mechanism of Acoustic Emission Generated around the Yield Point of an Al-Li-Cu-Mg-Zr Alloy | K. Sakamaki |
| 51 | Effect of Temperature on Crrosion Resistance of Aluminum in Sodium Chloride Solution | E. Sato |
| 52 | Effect of Secondary Cross Rolling on the Texture and Conical Cup Value of an Annealed 1050 Aluminum Sheet | J. Seino |
| 53 | Technique of Sequential Surface Analysis with ISS and AES | R. Shimizu |
| 54 | In-depth Surface Composition of AI-Mg Alloy under Ion Bombardment | R. Shimizu |
| 55 | Mechanical Alloying and Consolidation of an Aluminum-ion System | H. Shingu |
| 56 | Metastability of Amorphous Phases and its Application to the Consolidation of Rapidly Quenched Powders | H. Shingu |
| 57 | Growth of Quasi-Crystals | H. Shingu |
| 58 | Nano-meter Order Crystalline Structures of Al-Fe Alloys Produced by Mechanical Alloying | H. Shingu |
| 59 | Microscopic Observation on the Formation Process of a Twin boundary at Generation of Feathery Crystals | S. Tada |
| 60 | Multiplication Process of Twin boundaries in Feathery Crystals | S. Tada |
| 61 | Effects of the Die Condition and Billet Composition on the Surface Characteristics of the Extruded 6063 Aluminum Alloy | M. Tokizawa |
| 62 | Grain Size Distribution during Grain Growth of Titanium | T. Tozawa |
| 63 | Catalytic Activity of Alumina Prepard by Anodic Oxidation of Aluminum | M. Yamada |
| 64 | Preparation and Catalytic Properties of Special Alumina Membrane Formed by Anodic Oxidation of Aluminum | M. Yamada |
| 65 | Phase Diagram of Al-Si System under 21000 Bar | T. Yamane |
| 66 | Hardening of Anodic Coatings Formed on Aluminum in Sulfuric Acid with Ferromagnetic Metal Oxides under a Magnetic Field | C. Yoshimura |
| 67 | Effect of Insoluble Powders on Anodizing of Aluminum in an Oxalic Acid Bath | C. Yoshimura |
| 68 | Combined Effect of Solution and Dispersion Hardenings at High Temperatures | H. Yoshinaga |
| 69 | Threshold Stress in Al-Mg-Mn Alloys during High Temperature Deformation | H. Yoshinaga |
| 70 | Effect of the Colony Boundary on the Yield Strength of Al-CuAl2 Lamellar-Eutectic Composites at High Temperatures | H. Yoshinaga |
| 71 | Threshold Stress for High-Temperature Creep in Particle Strengthened Al-1.5 vol % Be Alloys | H. Yoshinaga |
| 72 | High-Temperature Creep and Threshold Stress of Precipitation-Hardened Al-0.7 at % Mn Alloy | H. Yoshinaga |
| 73 | Experimental Examination of the Additivity of High Temperature Solution Hardening due to Different Solute Elements | H. Yoshinaga |
| 74 | The High Temperature Deformation Mechanism in Pure Metals | H. Yoshinaga |
| 75 | High Temperature Creep Behavior of a Dispersion-and Solution-Hardened Al-3.1 at % Mg-1.3 vol % Be Alloy ―Absence of Threshold Stress― |
H. Yoshinaga |
| 76 | In-Situ Scanning Tunneling Microscopy for Platinum Surfaces in Aqueous Solutions | K. Itaya |
| 77 | Effect of Cold-Working on the Aging Behavior of an Al-8% Mg Alloy | M. Kanno |
| 78 | Improvement in Fracture Toughness of 7475 Aluminum Alloy by Applying the RRA (Retrogression and Re-Aging) Process | T. Ohnishi |
| 79 | Clean Surfaces of Metals Prepared By Scribing With a Diamond Tip | K. Okada |
| 80 | Control of Number of Etch Sites for Aluminum Electrolytic Capacitor Electrodes | O. Seri |
| 81 | An Analysis of Transient Thermal Stresses in Composite Structures Based on Nonhomogeneous Plane-Thermoelasticity | Y. Sugano |
| 82 | Interdiffusion in the α Solid Solution of the Al-Cu-Mg System | T. Takahashi |
| 83 | Effects of Cr, Mn and Zr on Recrystallized Grain Size of Al-Mg-Zn Alloys | H. Yamada |
| 84 | Wettability of SiC by Liquid Pure Metals | K. Ogino |
| 85 | Wettability of Graphite by Molten Al-Li Alloy | K. Ogino |
| 86 | Centrifugally Cast Aluminum Matrix Composites Containing Segregated Alumina Fibers | Y. Tsunekawa |
| 87 | Fabrication of Magnesium Alloy Matrix Composite Containing Aligned Precipitation-hardenable Stainless-Steel Fibers | Y. Tsunekawa |
| 88 | Fabrication of Silicon-carbide Whisker Reinforced Aluminum by Flame Spraying Methods | Y. Tsunekawa |
| 89 | Fabrication of K2O•6TiO2/Al Composite by Low Pressure Plasma Spraying | Y. Tsunekawa |