INDEX
| No | Title | Author |
|---|---|---|
| 1 | Properties of Fatigue Fracture in Aluminum Alloy Die Casting | K. Chijiiwa |
| 2 | Dynamic Recrystallization and Superplasticity of 7475 Aluminum Alloy | T. Endo |
| 3 | Anodizing of Al-Si Casting Alloys in a Sulfuric Acid Solution | R. Furuichi |
| 4 | The Role of Anions in the Formation of Hydroxide Films on Aluminum in Hot Aqueous Solutions | R. Furuichi |
| 5 | Formation of Hydroxide Films on Aluminum in Neutral Phosphate Solutions at High Temperature | R. Furuichi |
| 6 | Microstructural Study of Grain Boundary Cavitation during High Temperature Deformation of Al-4.5% Mg Alloy | T. Hasegawa |
| 7 | Origin of the Strength of Mechanically Alloyed Aluminum Alloys | T. Hasegawa |
| 8 | Greep Behaviour of an Al-Al2O3 Particle Alloy Produced by a Mechanical Alloying Process | T. Hasegawa |
| 9 | Rotary Flanging of Tubular Parts | M. Hayama |
| 10 | Cold Workability of Mg-Li and Mg-Zr-Li Alloys in Chill-cast Al-Li-Ti Alloys | S. Hori |
| 11 | Recrystallization Textures in Cold Rolled Al-Ti Alloys | N. Inakazu |
| 12 | Effect of Small Addition of Fe and Si on Recrystallization Texture of Drawn Aluminum | N. lnakazu |
| 13 | Effect of Precipitation on Recrystallization Textures in Al-Ge Alloy | N. lnakazu |
| 14 | Annealing Effects on X-Ray Diffraction Peaks of Melt Al-Cu-Fe Quasicrystals | H. Ino |
| 15 | Crystallographic Texture of Melt-Spun Al-based Icosahedral Quasicrystals | H. Ino |
| 16 | Effect of Treatment of the X-ray Diffraction of Al-Cu-Fe Quasicrystals | H. Ino |
| 17 | Nucleation of Recryst[llized Grains near Boundary in Copper Bicrystals | F. lnoko |
| 18 | Formation of Deformation Bands and Recrystallization in Tensile-Deformed Aluminum Single Crystals | F. Inoko |
| 19 | Behavior like Premelting of Grain Boundaries in Thin Foils of Aluminum, Copper, Nickel and Brass | F. lnoko |
| 20 | Desorption of Tritium from Al-Li Alloys at Elevated Temperatures | Y. Ishida |
| 21 | Characterization of Ceramics-Metal Joined Interfaces by HREM | Y. Ishida |
| 22 | Frontiers of Interfacial and Atomic Structures Studies | Y. Ishida |
| 23 | Effect of Mechanical Alloying on the Properties of Rapidly Solidified AlFe Alloys | J. Kaneko |
| 24 | Frabrication and Properties of Unidirectionally Reinforced SiC Whisker/AZ 31 Magnesium Alloy Composites | J. Kaneko |
| 25 | Effect of Hot Extrusion on the Mechanical Properties of SiC Whisker/AZ 91 Magnesium Alloy Composites | J. Kaneko |
| 26 | Mechanically Alloyed 2219 Aluminum Alloys Containing Non-Metallic Dispersoids | J. Kaneko |
| 27 | Mechanism of AIN Synthesis by Carbothermic Reduction of Al2O3 in a Flowing N2 Atmosphere | H. G. Katayama |
| 28 | Some Examinations on the Formation of AIN by Simultaneous Reduction-Nitriding of Al2O3 | H. Katayama |
| 29 | Tensile Properties of Various Sheet Metals Between Room Temperature and 200℃ | K. Kato |
| 30 | Deformation and Force Characteristics in Rolling of Profiled Metal Sheet on the Satellite Mill | K. Kato |
| 31 | Recrystallization Texture in Heavily Cold-Rolled Aluminum Single Crystals in (112) [111] Orientation | T. Kamijo |
| 32 | Recrystallization Texture in Alminum Single Crystal of the (123) [634] Orientation | T. Kamijo |
| 33 | Heterogeneous Precipitation of Intermediate Phases on Al3Zr Particles in Al-Cu-Zr and Al-Li-Cu-Zr Alloys | M. Kanno |
| 34 | Precipitation of Intermediate Phase in an Al-8% Mg Alloy | M. Kanno |
| 35 | The Effect of Recrystallization on The Formation of Composite Precipitates in an Al-3% Li-0.15% Zr Alloy | M. Kanno |
| 36 | Effects of Coper Addition on Cryogenic Tensile Properties of an Al-4.4% Zn-1.4% Mg Alloy | M. Kanno |
| 37 | A New Low-Temperature Dislocation-Relaxation Peak in Aluminum | T. Kino |
| 38 | Evolution of Structural Damage in High-Purity Aluminum Alloys During Ion Irradiation and the Following Heat Treamtents | T. Kino |
| 39 | In-Situ Observation of the Dynamic Behavior of Bubbles in Aluminum During 10 keV H2 Ion Irradiation and Successive Annealing | T. Kino |
| 40 | Effects of Transmutation Products on the Formation of Interstitial Loops in High Purity Aluminum | T. Kino |
| 41 | Amorphous Al-Cr Alloys by Mechanical Grinding of Rapidly Solidified Crystalline Powders | K. Kobayashi |
| 42 | Formation of Amorphous Al-Cr Alloys by Mechanical Alloying of Elemental Aluminum and Chromium Powders | K. F. Kobayashi |
| 43 | Mechanical Alloying of Al-3 at % Mo Powders | K. F. Kobayashi |
| 44 | Recrystallization Study of Aluminium Bicrystals using Laser Heating | M. Koiwa |
| 45 | Effect of Matricx Grain Size on the Mechanical Properties of SiC Whisker/6061 Aluminum Alloy Composites | Y. Kojima |
| 46 | Mechnical and Wear Properties of SiC Whisker/ADC 12 Aluminum Alloy Composites Fabricated by Die Casting | Y. Kojima |
| 47 | Estimation of Solute Fe Concentration in Commercial Pure Aluminium | S. Komatsu |
| 48 | Behavior of Electrolytic Cloring on Anodic Oxide Films Formed on Aluminum | N. Masuko |
| 49 | Observation of Structure and Crystallization Process induced by Electron Beam Irradiation of Anodic Films Formed on Aluminum Using a High Resolution Electron Microscope | N. Masuko |
| 50 | Structure of Porous Anodic Films Formed on Aluminum and Their Crystallization by Electron Beram Irradiation | N. Masuko |
| 51 | Creep Behavior and Threshold Stress of an Al-Al2O3-Zr Alloy | K. Matsuura |
| 52 | Creep Deformation and Fracture of an Aluminum Composite Reinforced with Continuous Alumina Fibres | K. Matsuura |
| 53 | Effect of Interfacial Structure and Energy on Corrosion and Stress-Corrsion-Craking in α Cu-Al Alloy Bicrystals | T. Mimaki |
| 54 | Stress Corrosion Cracking of Copper Bicrystals with〈110〉-Tilt Σ3,Σ9,and Σ11 Coincident Site Lattice Boundaries | T. Mimaki |
| 55 | Stress-Corrosion Cracking of (100)-Twist Boundaries in Cu-9 at.% Al Alloy | T. Mimaki |
| 56 | Effects of A Boundary Node on Grain-Boundary Sliding and Intergranular Fracture in Cu-9 at.% Al Tricrystals | S. Miura |
| 57 | Relaxation in Dispersion-Hardened Alloys by VolumeDiffusion Diffusion | S. Miura |
| 58 | Phase Separations into A2+DO3 or B2+DO3 Two Phases in Fe-Si-Ge Ternary Ordering Alloys | T. Miyazaki |
| 59 | Computer Simulation of Phase Decomposition in the Regular Solid Solution based upon the Non-Lniear Diffusion Equation | T. Miyazaki |
| 60 | Phase Decomposition of Liquid-Quenched β-Type Ti-Cr Alloys | T. Miyazaki |
| 61 | Temperature-Time-Comopsition Diagram for the Cellular Precipitation in the Al-Zn Alloy System | T. Miyazaki |
| 62 | Influence of Mechanical Grinding on Structure and Mechanical Property of Al-Cr P/M Alloy | T. Morooka |
| 63 | Machnical Alloying Process of Cu-Zn System and Microstrural Change of the Alloy in the PowderExtrusion | T. Morooka |
| 64 | Three Wetting Phases in the Chemically Reactive Mg0/Al System | H. Nakae |
| 65 | Measurement of Wetting of Graphite by Liquid Al and Al-Si Alloys with Meniscography | H. Nakae |
| 66 | Formation of Structual Ll2 Compounds in the Ternary Al-Ti-Cr System | Y. Nakayama |
| 67 | Formation of Ternary Ll2 Compounds in TiA13-base Alloys Containing Ag | Y. Nakayama |
| 68 | Effects of Grain Size on Creep Behaviour of Ti-50 mol% Al lntermetallic Compound at 1100 K | H. Oikawa |
| 69 | Properties on Electrical Contacts of Hard Carbon Film Brushes in a Vacuum | K. Okada |
| 70 | The Influence of Interfacila Reaction on the Strength of C/Al Composites | A. Okura |
| 71 | Strengthening and Bending Deformability of Al-4.5 mass % Mg Alloy Billets Produced by Heated Mold Continuous Casting Method (OCC) | A Ohno |
| 72 | Strengthening and Twisting Deformability of Al-l mass % Cu Alloy Billets Produced by Heated Mold Continuous Casting Method (OCC) | A. Ohno |
| 73 | Friction Welding of Rapidly Solidiied Powder Metallurgy Al-Fe Alloys | M. Otsuka |
| 74 | Deformation of Mechanically Alloyed Al-TiB2 Alloys at Elevated Temperatures | M. Otsuka |
| 75 | Flow Softening of 7075 Aluminum Alloy under Hot Compression | T. Sakai |
| 76 | Acoustic Emission Waveforms Generated by the Phase Transformations in Cu-Al-Ni Shape Memory Alloy Single Crystals and its Sources | K. Sakamaki |
| 77 | FatiWue Crack Initiation and Growth of Cu-Al-Ni Shape-Memory Alloys | K. Sakamaki |
| 78 | Effect of Organic Food Additives on Pitting Corrosion of Aluminum Alloys | E. Sato |
| 79 | Amorphization of Al-Fe Alloys Formed by Ball Milling and Repeated Rolling | H. Shingu |
| 80 | Residual Stress Generated by Cold Roling and Low Temperature Absorbed Energy in 5083 Aluminum Alloy | T. Takaai |
| 81 | Effect of Residual Stress on the Absorbed Energy of the Fracture | T. Takaai |
| 82 | Superplastic Deformation Behaviours of Zn-22 % Al Eutectoid Alloy | T. Takaai |
| 83 | Homogenization and Age Hardening Behavior in AZ91D Magnsdium Alloy Solidified in Water-cooled Copper Mold | T. Takahashi |
| 84 | Formation of Locaiized Corrosion Fissure in a Thick Plate of 7475 Aluminum Alloy | T. Takahashi |
| 85 | Harness of Quasicrystals | S. Takeuchi |
| 86 | Plastic Deformation of Al-Ru-Cu Icosahedral Quasi crystals | S. Takeuchi |
| 87 | Acoustic Emission Generated during the Tensile Testing of AZ 31 Magnesium Alloy | T. Tozawa |
| 88 | Fatigue Fracture of AZ 31 Magnesium Alloy in Vacuum | T. Tozawa |
| 89 | Acoustic Emission Generated during the Tensile Testing of AZ 31 Magnesium Alloy | T. Tozawa |
| 90 | Effect of the Casting Shape on the Deformation of Plane AC4C Alloy Castings | T. Umeda |
| 91 | Effect of Silicon Content on Deformation of Al-Si Binary Alloy Castings | T. Umeda |
| 92 | Anomalous X-ray Scattering Study of Amorphous and Icosahedral Al75Cu15V10 Alloys | Y. Waseda |
| 93 | Structural Study of Amorphous Mg50Ni30La20 Alloy by the Anomalous X-ray Scattering (AXS) Method | Y. Waseda |
| 94 | Anomalous X-ray Scattering Study of the Quasi-cyrstalline Al65Cu20Fe15 Alloy | Y. Waseda |
| 95 | Solid Solubilities of Manganese and Titanium in Aluminum at 0.1 MPa and 2.lGPa | T. Yamane |
| 96 | Anodizing of Aluminum in Amine Alkaline Baths Containing Fluoride | C. Yoshimura |
| 97 | The High Temperature Deformation Mechanism in Solution Hardened Alloys | H. Yoshinaga |
| 98 | High-Temperature Creep and Threshold Stress of Precipitation-Hardened Al-0.7 at % Mn Alloy | H. Yoshinaga |
| 99 | A New Analytical Procedure for the Identification of High Temperature Deformation Mechanisms Using the Strain Rate Change Test | H. Yoshinaga |
| 100 | Absence of Threshold Stress for High-Temperature Creep of Dispersion-and Solution-Hardened Al-3.1 at % Mg-l.3vol% Be Alloy | H. Yoshinaga |
| 101 | Siding Behavior of Coincidence Grain Boundaries Deviating from Ideal Symmetric Tilt Relationship | H. Fukutomi |
| 102 | Surface Reaction of Dialkyl Phosphite on Alumina and Magnesia Studied by Inelastic Electron Tunneling Spectroscopy | M. Higo |
| 103 | Solidified Structure in Plate Casting of Al-Li Alloys | T. Ikeda |
| 104 | Deformation Behavior and Upsettability of Particle Dispersed Aluminum Matrix Composites | N. Kanetake |
| 105 | Analytical Study on Deformation Behaviour of Metal Matrix Composites | N. Kanetake |
| 106 | Analysis of Curling of Sheet Metal Laminates in Uniaxial Tension | H. Ohsawa |
| 107 | Influence of Strain Rate Sensitivity on Sheet Formability of Rate Dependent Materials | H. Ohsawa |
| 108 | AE Singals and Fracture in SiC-Fiber Reinforced Aluminum after Applying Cyclic Deformation | A. Okada |
| 109 | Turning Machinability of Al2O3-SiO2 Short-Fiber Reinforced ADC 12 Aluminum Alloy Composites | T. Saga |
| 110 | Improvement of Ductility by Composite Precipitates in Chill-Cast Al-Li-Ti Alloys | S. Saji |
| 111 | Mechanical Alloying of Al-20 mass % Ti Mixed Powders | S. Saji |
| 112 | The Dissloution of FeAl3 Intermetallic Compound and Deposition on Aluminum in A1Cl3 Solution | O. Seri |
| 113 | Magnesium Alloy Matrix Composites with Unidirectional SUS 631 Fibers Aligned in the Superimposed Magnetic Field | Y. Tsunekawa |
| 114 | Thermal Conductivity of Thermal Barrier Composite Layer Fabricated by Low Pressure Plasma Spraying | Y. Tsunekawa |
| 115 | Heat Transfer in Thermal Barrier Coating with Gradient Constituents Fabricated by Low Pressure Plasma Spraying | Y. Tsunekawa |
| 116 | Aluminum Matrix Composite Containing Silicon Carbide Whiskers Fabricated by Reactive Low Pressure Plasma Spraying | Y. Tsunekawa |
| 117 | Fabrication of Titanium Aluminide Layers by Low Pressure Plasma Spraying | Y. Tsunekawa |
| 118 | Titanium Aluminide Matrix Composite Layers by Reactive Low Pressure Plasma Spraying | Y. Tsunekawa |
| 119 | Helium Production and Precipitates in Neutron-Irradiated Al-Li and Al-Mg-Li Alloys | K. Kamada |
| 120 | Precipitation Hardening Owing toδ' Al3 Li in Low Activation Al-Li-12Si-3Mg Alloy | K. Kamada |
| 121 | Measuremen s of Evaporation Rate of Lithium from Al-Li Alloy by Depth Profiling with an Ion Beam | K. Kamada |
| 122 | Desorption Gases from Aluminium Materials used as Extremely High Vacuum Chamber | T. Yamashina |
| 123 | Carbide Addition on Aluminum Alloy Surface by Plasma Transferred Arc Welding Process | F. Matsuda |
| 124 | Laser Surface Alloying on Aluminum | F. Matsuda |
| 125 | Increase in Mechanical Strength of Al-Y-Ni Amorphous Alloys by Dispersion of Nanoscale fee-Al Particles | A. Inoue |
| 126 | Ultrahigh Tensile Strength of Al88Y2Ni9M1(M=Mn or Fe) Amorphous Alloys Containing Finely Dispersed fee-Al Particles | A. Inoue |
| 127 | Production and Properties of Light-Metal-based Amorphous Alloys | A. Inoue |
| 128 | Al-Ni-Y-Co Amprphous Alloys with High Mechanical Strengths, Wide Supercooled Liquid Region and Large Glass-Forming Capacity | A. Inoue |
| 129 | Amorphous Al-based Thick Sheets Produced by Rapid Solidification of Supercooled Liquid Droplets | A. Inoue |
| 130 | Structural Relaxation of Aluminum-Lanthanide Metal-Transition Metal Amorphous Alloys upon Low Temperature Annealing | A. Inoue |