| 1 |
Effects of pH and Temperature on the Deposition Properties of Stannate Chemical Conversion Coatings Formed by the Potentiostatic Technique on AZ91 D Magnesium Alloy |
H. Konno |
[Electrochimica Acta, 53(2008)4267-4275] |
| 2 |
Preparation of Hydrogen Storage Ti-V-Cr Alloy from the Oxide Mixture in CaCl2 |
Ryosuke O. Suzuki |
[Proceedings of 11th World Conference on Titanium (Ti-2007), (Kyoto, Japan, June 3-7, 2007) "Ti-2007 Science and Technology", ed. by M. Niinomi, S. Akiyama, M. Ikeda, M. Hagiwara and K. Maruyama, The Japan Institute of Metals(JIM), Sendai, Japan, 2007, pp. 107-110 ] |
| 3 |
Reduction of TiCl4 Gas by Ca Dissolved in Molten Calcium Chloride |
Ryosuke O. Suzuki |
[Proceedings of 11th World Conference on Titanium (Ti-2007), (Kyoto, Japan, June 3-7, 2007) " Ti-2007 Science and Technology", ed. by M. Niinomi, S. Akiyama, M. Ikeda, M. Hagiwara and K. Maruyama, The Japan Institute of Metals(JIM), Sendai, Japan, 2007, pp. 103-106] |
| 4 |
Calciothermic Reduction of TiO2 with ZrO2 Anodic in Molten CaCl2 |
Ryosuke O. Suzuki |
[Proceedings of 11th World Conference on Titanium (Ti-2007), (Kyoto, Japan, June 3-7, 2007) " Ti-2007 Science and Technology", ed. by M. Niinomi, S. Akiyama, M. Ikeda, M. Hagiwara and K. Maruyama, The Japan Institute of Metals(JIM), Sendai, Japan, 2007, pp. 99-102] |
| 5 |
Influence of Silicon on the Growth of Barrier-Type Anodic Films on Titanium |
H. Habazaki |
[Electrochimica Acta, Vol. 52, No. 24(2007), pp. 6834-6840] |
| 6 |
Improvement of Corrosion-resistance of Anodized Oxide Film by Preferential Removing of FeAl3 System Intermetallic Compound on Commercial Aluminum 1100 |
O. Seri |
[J. Light Japan Inst. Metals, vol. 57, No. 10, (2007), pp. 457-460] |
| 7 |
Interfacial Strengthening by Soft Phase in Lamellar Microstructure of TiAl Alloys |
K. Maruyama |
[Applied Physics Letters, Vol. 90(2007), pp. 171925 1-3] |
| 8 |
Fatigue Characteristics of Metallic Biomaterials |
M. Niinomi |
[Int. J. Fatigue, Vol. 29, (2007), pp. 992-1000] |
| 9 |
Frictional Wear Characteristics of Biomedical Ti-29Nb-13Ta-4.6Zr Alloy with Various Microstructures in Air and Simulated Body Fluid |
M. Niinomi |
[Biomedical Materials, Vol. 2(2007), pp. S167-S174] |
| 10 |
Effects of Alloying Elements on Hard-ceramic Layer Formation on Surfaces of Biomedical Ti-29Nb-13Ta-4.6Zr and Ti-6Al-4V ELI during Gas Nitriding |
M. Niinomi |
[J. Japan Inst. Metals, Vol. 71, No. 4(2007), pp. 415-422] |
| 11 |
Micro Irregular Hole Slotting by Ultra Sonic Vibration Machining Method (A Study on Multi-stroke Micro Groove Slotting for Forming Micro Irregular Hole) |
T. Furusawa |
[Transactions of the Japan Society of Mechanical Engineers, Series C, Vol. 73, No. 734(2007), pp. 2828-2833] |
| 12 |
Development of Computer Aided Manufacturing (CAM) for Slotting the Irregular Holes by Ultra-Sonic Vibration Machining Method |
T. Furusawa |
[Proceedings of Malaysia-Japan International Symposium on Advanced Technology 2007 (MJISAT 2007), (2007), pp. MJISAT-27] |
| 13 |
Feasibility of Friction Stir Welding for Joining and Microstructure Refinement in a ZK60A Magnesium Alloy |
Y. Motohashi |
[Materials Transactions, Vol. 48, No. 12, (2007), pp. 3140-3148] |
| 14 |
Grain Refinement Process in Commercial 7075-T6 Aluminum Alloy under Friction Stir Welding and Superplasticity |
Y. Motohashi |
[Materialwissenschaft und Werkstoffteechnik, Vol. 39, No. 4-5, (2008), pp. 275-278] |
| 15 |
Effect of Microstructure on the Hydrogen Behavior in 7075 Series Aluminum Alloys |
G. Itoh |
[The Journal of Japan Institute of Light Metals, Vol. 58, No. 1(2008), pp. 15-21] |
| 16 |
Influence of Impurity Hydrogen on Coarse Grain Evolution in High Purity Aluminum Foils for Electrolytic Capacitors |
G. Itoh |
[The Journal of Japan Institute of Light Metals, Vol. 58, No. 6(2008), pp. 229-235] |
| 17 |
Production of AZ31B Magnesium Alloy Strips by Semisolid Continuous Casting |
T. Motegi |
[Journal of Japan Institute of Metals, Vol. 71(2007), No. 9, pp.758-762] |
| 18 |
Effect of Composition on Hydrogen Embrittlement of Al-Mg-Si Base Alloys |
M. Kanno |
[Aluminium Alloys, Their Physical and Mechanical Properties, Vol., pp. 1480, Proceeding of the International Conference of ICAA 11, edited by J. Hirsch, B. Skrotzki and G. Gottstein, (2008), Wiley-VCH; and also to be appeared in J. Japan Inst. Light Metals, Vol. 59(2)(2009)] |
| 19 |
Thermophysical Properties of the Melts of AlPdMn Icosahedral Quasicrystal |
S. Nanao |
[Philosophical Magazine, Vol. 87, No. 18-21(2007), pp. 2965-2971] |
| 20 |
High-resolution Inelastic X-ray Scattering Measurements of an Al72Pd20Mn8 Alloy above the Melting Point |
S. Nanao |
[Journal of Non-Crystalline Solids, Vol. 353(2007), pp. 3174-3176] |
|
| 21 |
Determination of the R-line Luminescence Spatial Resolution of a Near-field Optical Spectroscopy System for Piezospectroscopy |
Y. Kagawa |
[Journal of Applied Physics, Vol. 101(2007), p. 123527] |
| 22 |
Effect of Electrolyte Species on Dielectric Property of Crystalline Anodic Alumina Film |
S. Ono |
[Electrochemistry, Vol. 75, No. 11(2007), pp. 873-878] |
| 23 |
Control of Pit Initiation Sites on Aluminum Foil Using Colloidal Crystals as Mask |
S. Ono |
[Electrochimica Acta, Vol. 53, (2007), pp. 83-86] |
| 24 |
Nanopatterning of Silicon with Use of Self-organized Porous Alumina and Colloidal Crystals as Mask |
S. Ono |
[Electrochimica Acta, Vol. 52, (2007), pp. 2898-2904] |
| 25 |
Extrusion of Tube with Holed Rib |
M. Murata |
[Journal of Japan Society for Technology of Plasticity, Vol. 48, No. 554 (2007-3), 234-238] |
| 26 |
Mechanical Properties of Magnesium Alloy AZ31 after Severe Plastic Deformation |
T. Sakai |
[Materials Transactions, 49 (2008), pp. 69 to 75] |
| 27 |
Effect of Deformation Temperature on Microstructure Evolution in Aluminum Alloy 2219 during Hot ECAP |
T. Sakai |
[Material Science Engineering A, 486 (2008), 662-671, doi: 10.1016/j.msea.2007.09.070] |
| 28 |
Grain Refinement in Aluminum Alloy 2219 during ECAP at 250°C |
T. Sakai |
[Material Science Engineering: A 473 (2008), 297-305] |
| 29 |
Experimental and Numerical Study on Deformation Behavior in Dieless Drawing Process of Superplastic Microtubes |
K. Manabe |
[Journal of Materials Processing Technology, Vol. 191(2007), pp. 59-63] |
| 30 |
Fabrication of Site-Controlled Tunnel Pits with High Aspect Ratios by Electrochemical Etching of Al using Masking Film |
H. Masuda |
[Electrochemical and Solid-State Letters, Vol. 10, No. 10, C60-C62(2007)] |
| 31 |
Influence of Casting Conditions on the Occurrence of Internal Cracks for 6022 Aluminum Alloy Fabricated by high-speed Twin-roll Caster |
S. Kumai |
[Journal of Japan Institute of Light Metals, Vol. 57, No. 3(2007), pp. 119-124] |
| 32 |
Mechanical Properties of 6022 Aluminum Alloy Sheets with High Iron Content Fabricated by a High-speed Twin Roll Caster |
S. Kumai |
[Journal of Japan Institute of Light Metals, Vol. 57, No. 10(2007), pp. 444-449] |
| 33 |
New Expression Method for Tear Toughness of Cast and Die-cast Aluminum Alloys |
S. Kumai |
[Journal of Japan Foundry Engineering Society, Vol. 79, No. 11(2007), pp. 671-675] |
| 34 |
Improvement of Tear Toughness of ADC12 Aluminum Alloy by Refined Solidification Structure |
S. Kumai |
[Journal of Japan Foundry Engineering Society, Vol. 79, No. 12(2007), pp. 717-725] |
| 35 |
Growth Manner of Intermetallic Compounds at the Weld Interface of Steel/ Aluminum Alloy Lap Joint Fabricated by a Defocused Laser Beam |
S. Kumai |
[Materials Transactions, Vol. 48, No. 6(2007), pp. 1396-1405] |
| 36 |
Interfacial Microstructure and Strength of Steel/ Aluminum Alloy Lap Joint Fabricated by Magnetic Pressure Seam Welding |
S. Kumai |
[Materials Science and Engineering A, Vol. 471, No. 1-2(2007), pp. 95-101] |
| 37 |
Effects of Probe Tip Position on microstructure and Bonding Strength of Friction Stir Weld Aluminum Alloy/ Steel Lap Joint |
S. Kumai |
[Journal of Japan Institute of Light Metals, Vol. 57, No. 11(2007), pp. 529-535] |
| 38 |
Formation of Laminate Structure at the Friction Stir Weld Interface of Aluminum Alloy/ Steel Lap Joint |
S. Kumai |
[Journal of Japan Institute of Light Metals, Vol. 57, No. 11(2007), pp. 536-541] |
| 39 |
A Flexible Shear Spinning of Axi-symmetrical Shells with a General-Purpose Mandrel |
K. Kawai |
[Journal of Materials Processing Technology, Vol. 192-193(2007), pp. 13-17] |
| 40 |
Effect of Deformation Constraints on the Texture Formation in Al-5mass%Mg Solid Solution at High Temperatures |
H. Fukutomi |
[The Proceeding of ICOTOM15(2008)] |
|
| 41 |
Influence of Grain Boundary Migration on {001} Texture Formation in Al-3mass%Mg Based Alloys during High Temperature Compression Deformation |
H. Fukutomi |
[Materials Transaction, Vol. 48(2007), 2002-2007] |
| 42 |
Superplastic Forming and Foaming Process for Porous Aluminum Plates |
K. Kuribayashi |
[Materials Science Forum, 539-543(2007), pp. 1839-1844] |
| 43 |
Cu Segregation around Metastable Phase in Al-Mg-Si Alloy with Cu |
S. Ikeno |
[The Materials Transactions, Vol. 48, pp. 967-974, 2007] |
| 44 |
The Crystallographic Orientation Relationship between Al2O3 and MgAl2O4 in the Composite Material Al2O3/Al-Mg-Si Alloy |
S. Ikeno |
[The Journal of Materials Science, Vol. 42, pp. 5680-5685, 2007] |
| 45 |
3-D Strain Mapping Inside Materials by Microstructural Tracking in Tomographic Volumes |
H. Toda |
[Computational Methods and Experiments in Materials Characterisation, 2007, 177-186] |
| 46 |
Three-dimensional Visualization of the Interaction between Fatigue Crack and Micropores in an Aluminum Alloy Using Synchrotron X-ray Microtomography |
H. Toda |
[Metallurgical and Materials Transactions A, Vol. 38A, No. 8(2007), pp. 1774-1785] |
| 47 |
Wavelet-based Local Region-of-interest Reconstruction for Synchrotron Radiation X-ray Microtomography |
H. Toda |
[Journal of Applied Physics, Vol. 102, (2007), 114908] |
| 48 |
Three-dimensional Measurement of Local Strain Distribution by Tracking Microstructural Features in High-resolution SR-CT Image |
H. Toda |
[Key Engineering Materials Vols. 345-346(2007), pp. 1153-1156] |
| 49 |
3-D Measurement of Crack-tip Opening Displacement along Crack Front Line via Synchrotron Microtomography |
H. Toda |
[ATEM ’07, JSME-MMD, Sep. 12-14, 2007] |
| 50 |
Measurement of 3-D Strain Distribution on Tracking of Microstructural Features in High-resolution SR-CT Image |
H. Toda |
[ATEM ’07, JSME-MMD, Sep. 12-14, 2007, OS3-1-2] |
| 51 |
Change in Microstructure of Al-Si-Cu Casting Alloys during High-temperature Solution Treatment |
H. Toda |
[Proceedings of 10th Asian Foundry Congress (AFC10), 2008] |
| 52 |
Application of High Resolution Microtomography to Cast Aluminium Alloys |
H. Toda |
[Proceedings of 10th Asian Foundry Congress (AFC10), 2008, 121-127] |
| 53 |
High-density Three-dimensional Mapping of Internal Strain by Tracking Microstructural Features |
H. Toda |
[Acta Materialia, .Vol. 56, No. 10(2008), 2167-2181] |
| 54 |
Hot-Dip Coating of Aluminum Alloy to Steel Substrates with Ultrasonic Vibration |
Y. Tsunekawa |
[J. JFS, Vol. 79, No. 9(2007), pp. 529-536] |
| 55 |
Formation of Ti2FeSn Compound and Phase Equilibria at the Ti-Fe Side of Ti-Fe-Sn Ternary System |
M. Doi |
[Ti-2007 Science and Technology, ed by M. Niinomi et al., JIM, Sendai, (2007), pp. 725-728] |
| 56 |
Effect of Processing Route on Microstructure and Texture Development in ECAP of Al-Ti Alloy |
Y. Watanabe |
[Materials Science Forum, 561-565, 251-254(2007)] |
| 57 |
Density and Hardness Gradients of Functionally Graded Material Ring Fabricated from Al-3mass%Cu Alloy by a Centrifugal in-situ Method |
Y. Watanabe |
[Mater. Trans., 48, No. 11, 2945-2952(2007)] |
| 58 |
Microstructure Behavior of Al-Mg-Sc Alloy Processed by ECAP at Elevated Temperature |
Y. Watanabe |
[Acta Mater., 56, No. 4, 821-834(2008)] |
| 59 |
Effects of Processing Routes on Wear Property of Al-Al3Ti Alloys Severely Deformed by ECAP |
Y. Watanabe |
[Materials Science Forum, 584-586, 971-976(2008)] |
| 60 |
Influence of Porosity and Pore Size on Electrical resistivity of Porous Aluminum Produced by Spacer Method |
M. Mabuchi |
[Mater. Trans., Vol. 48, No. 1(2007), pp. 32-36] |
|
| 61 |
Monotonic and Cyclic Compressive Properties of Porous Aluminum Fabricated by Spacer Method |
M. Mabuchi |
[Mater. Sci. Eng. A, Vol. 459, No. 1-2(2007), pp. 286-293] |
| 62 |
Texture Control of Commercial Pure Aluminum Sheets by Cross Rolling with an Idle Roll |
N. Furushiro |
[J. Japan Inst. Light Metals, Vol. 57, No. 2(2007), pp. 52-56] |
| 63 |
Laser Joining of 6061 Aluminum Alloy and Steel Using Zn Filler Metal |
T. Takemoto |
[Smart Processing Technology, Vol. 2(2008), 127-130] |
| 64 |
Fabrication of Porous Magnesium with Directional Pores through Use of Hydrogen Thermally Decomposed from MgH2 Powders during Unidirectional Solidification |
H. Nakajima |
[Journal of Materials Research, Vol. 23(2008), pp. 849-855] |
| 65 |
Room Temperature Micro-bonding of Fine Wires to Foils |
Y. Takahashi |
[Solid State Phenomena, Vol. 127(2007), pp. 277-282] |
| 66 |
Evolution of Antiphase Domain (APD)/lamella Mixed Microstructure in Ti-39at%Al Single Crystals |
Y. Minamino |
[Materials Science & Engineering A, Vol. 478, No. 1(2008), pp. 147-153] |
| 67 |
Influence of Alloying Elements on Interfacial Reaction and Strength of Aluminum/ Steel Dissimilar Joints for Light Weight Car Body |
A. Hirose |
[Materials Science Forum, Vols. 539-543(2007), pp. 3888-3893] |
| 68 |
The Effect of Tin Addition on the Phase Constitution and Heat Treatment Behavior in Ti-7mass%Cr Alloy for Biomedical and Healthcare Applications |
M. Ikeda |
[Ti-2007 Science and Technology, JIM(2007), pp. 1433-1436] |
| 69 |
Evaluation of Surface Modified Ti-6Al-4V Alloy by Combination of Plasma-carburizing and Deep-rolling |
T. Takasugi |
[Materials Science and Engineering A, Vol. 488, No. 1-2(2008), pp. 139-145] |
| 70 |
Effect of Mn on Fracture Toughness in Mg-6Al-1wt.%Zn Alloy |
K. Higashi |
[Materials Science Engineering A, Vol. 479(2008), pp. 117-124] |
| 71 |
Anode Properties of Lithium Storage Alloy Electrodes Prepared by Gas-Deposition |
T. Esaka |
[Electrochemical and Solid State Letters, Vol. 10, No, 11(2007), pp. J146-J149] |
| 72 |
High Strain-Rate Compressive Stress-Strain Response of Friction Stir Welded AA7075-T651 Joints in Through-Thickness Direction |
T. Yokoyama |
[The Journal of Japan Institute of Light Metals, Vol. 57, No. 11(2007), pp. 518-523] |
| 73 |
High Strain-Rate Compressive Stress-Strain Response of Friction Stir Welded AA2024-T3 Joints in Through-Thickness Direction |
T. Yokoyama |
[Journal of the Society of Materials Science, Japan, Vol. 57, No. 4(2007), pp. 388-393] |
| 74 |
Dynamical Response of Helium Bubble Motion to Irradiation with High-energy Self-ions in Aluminum at High Tempareture |
K. Ono |
[Phil. Mag. Vol. 89 (2008) 513-524] |
| 75 |
Hydrogen Diffusion in Titanium-hydride Observed by Diffraction-enh+anced X-ray Imaging Method |
K. Mizuno |
[Physica Status Solidi (a) 204 (2007) 2734-2739] |
| 76 |
Interfacial Reaction in AZ91D Magnesium Matrix Composite Reinforced with Aluminum Borate Whisker |
G. Sasaki |
[Mat. Trans. 48, 7(2007), pp. 1948-1954] |
| 77 |
Study of Supersonic Flow Issuing from Annular Nozzle |
T. Kojima |
[Journal of Jet Flow Engineering, Vol. 24, No. 3(2007), 11-15] |
| 78 |
Variation of Hardness with Microstructure Evolutions in Metastable  Titanium Alloy TIMETAL ®LCB |
K. Nakai |
[Material Science Forum, Vols. 561-565(2007), pp. 2067-2070] |
| 79 |
Effect of Microstructural Evalutions on Hardness in a Metastable Ti Alloy |
K. Nakai |
[Proceedings of Ti-2007 Science and Technology, Edited by M. Niinomi et al., The Japan Institute of Metals(2007), pp. 459-462] |
| 80 |
Microstructures and Mechanical Properties of AZ61 Magnesium alloy after Processing with High Presser Torsion |
Z. Horita |
[Journal of Japan Institute of Metals, 71(2), (2007), pp. 213-217] |
|
| 81 |
High Pressure Torsion Using Ring Specimens |
Z. Horita |
[Scripta Materialia, 58, (2008), pp. 469-472] |
| 82 |
Achieving Exceptional Superplasticity in a Bulk Aluminum Alloy Processed by High-pressure Torsion |
Z. Horita |
[Scripta Materialia, 58, (2008), pp. 1029-1032] |
| 83 |
Relation between Ridging and Texture Components in Al-Mg-Si Alloy |
H. Nakashima |
[Materials Science Forum, Vols. 558-559, (2007), pp. 71-76] |
| 84 |
In-Situ EBSP Analysis of Grain Boundary Migration during Recrystallization in Pure Aluminum Foils |
H. Nakashima |
[Materials Science Forum, Vols. 558-559, (2007), pp. 351-356] |
| 85 |
Wear Characteristic of Semi-solid Formed Al-Al3Ni Functionally Graded Material |
Y. Fukui |
[J. Japan Inst. Metals, Vol. 72, No. 7(2008), pp. 496-502] |
| 86 |
Quantitative Evaluation of Creep Curve of Alloy-type and Metal-type Creep in Magnesium-Aluminum Binary Alloys at Around 0.6Tm |
H. Sato |
[Supplemental Proceedings, TMS2008, 137th Annual Meeting & Exhibition, 3, 199-204, 2008] |
| 87 |
Electron Backscattering Diffraction (EBSD) Analysis of Mechanically Milled and Spark Plasma Sintered Pure Aluminium |
M. Kubota |
[Scripta Materialia, Vol. 57(2007), pp. 719-722] |
| 88 |
A Quantitative Study of Precipitation of Metastable Phases in an Al-1.94 at%Cu Alloy during Isothermal Aging at 373K |
M. Takeda |
[J. Japan Inst. Metals, Vol. 72, No. 6(2008), pp. 407-412] |
| 89 |
Effect of Strain Aging on Stress Fluctuation Accompanied by Tensile Deformation in 5083 Aluminum Alloy Plate |
Y. Nakayama |
[J. Japan Institute of Light Metals, Vol. 57, No. 7(2007), pp. 280-285] |
| 90 |
Effect of Holding Stress, Temperature, and Time in Strain Aging on Flow Curves of 5083-O Aluminum Alloy Plate |
Y. Nakayama |
[J. Japan Institute of Light Metals, Vol. 58, No. 3(2008), pp. 93-103] |
| 91 |
Low Thermal Conductivity of Al-based Icosahedral Quasicrystals and Approximants |
T. Takeuchi |
[Proceedings of ICT2007 (2007/6/3-6/7, Jeju, South Korea)] |
| 92 |
Control of Onset of Buckling Lobe in Axial Impact of Square Tube |
M. Yamashita |
[Materials Science Forum, Vol. 566(2008), pp. 173-178] |
| 93 |
Laser Cladding of Fe-Cu Based Alloys on Aluminum |
K. Uenishi |
[Solid State Phenomena, Vol. 127(2007), pp. 331-336] |
| 94 |
Inhomogeneity in Plastic Deformation of Aluminum Sheet |
H. Utsunomiya |
[International Symposium on Metals Root Technology, (2007), pp. 1-4] |
| 95 |
Effect of Aging Microstructure on Hydrogen Embrittlement Sensitivity in an Al-Mg-Si Alloy |
K. Horikawa |
[Transactions of the Japan Society of Mechanical Engineers, Vol. 71, No. 736, (2007), pp. 1366-1374] |
| 96 |
Biocompatibility of HAp-Loaded Anodic Oxide Titanium Plates |
M. Iwasaki |
[Proceedings of New Technologies of Creation and Application of Bioceramics in Rehabilitation Medicine, Tomsk, Russia, 2007 October 8-10, pp. 132-134(2007)] |
| 97 |
Hydroxyapatite-loaded Thick Anodized Titanium with Large-scale Pores |
M. Iwasaki |
[Journal of Surface Finishing Society of Japan, Vol. 59, No. 5, pp. 60-62(2008)] |
| 98 |
Forming of Square Cups by Using the Developed Blank of Aluminum Sheet |
N. Hatanaka |
[The Japan Institute of Light Metals, Vol. 58, No. 6(2008), pp. 242-245] |
| 99 |
Evolution of Ultra-Fine Grains in AZ31 and AZ61 Mg Alloys during Multi Directional Forging and Their Properties |
H. Miura |
[Materials Transactions, Vol. 49, No. 5(2008), pp. 1015-1020] |
| 100 |
Straightly-aligned Dislocation Arrays in h.c.p Metals after Ambient Temperature Creep |
E. Sato |
[Ti-2007 Science and Technology, 2007, 339-342] |
|
