INDEX

1	Morphological Control of Anodic Crystalline Tio2 Nanochannel Films for Use in Size-selective Photocatalytic Decomposition of Organic Molecules	H. Habazaki	[Applied Surface Science, 301(2014)500-507]
2	Surface Treatment of Titanium Using Thermal Oxidation for Biomedical Applications	T. Narushima	[Corrosion Engineering of Japan, Vol. 63, No. 5(2014), pp. 295-300]
3	Tritium Autoradiography Study on Hydrogen Invading Aluminum from Different Environments	G. Itoh	[Journal of Japan Institute of Metals and Materials, Vol. 77, No. 12(2013), pp. 565-570]
4	The Effect of Microstructure on Mechanical Properties of Forged 6061 Aluminum Alloy	G. Itoh	[Materials Transactions, Vol. 55, No. 1(2014), pp. 114-119]
5	Estimation of Plateau Stress of Porous Aluminum Based on Mean Stress on Maximum-Porosity Cross Section	T. Utsunomiya	[Materials Transactions, Vol.54, No. 7(2013), pp. 1182-1186]
6	Fabrication and Tensile Property of Sandwich panel with ADC12 Foam Core by Friction Stir Processing Route	T. Utsunomiya	[Journal of the Japan Institute of Metals and Materials, Vol. 77, No. 9(2013), pp. 385-390]
7	Solidification Structure and Casting Defects in High-Speed Twin-Roll Cast Al-2mass% Si Alloy Strip	S. Kumai	[Materials Transactions, Vol. 54, No. 10(2013), pp. 1930-1937]
8	Effects of Eutectic Si Particle Morphology on Bendability of Al-11%Si-2.5%Cu Alloy	S. Kumai	[Journal of Japan Foundry Engineering Society, Vol. 85, No. 7(2013), pp. 407-413]
9	Fabrication of Porous Al-Cu Alloys with Aligned Unidirectional Pores by Dipping Pipes in Melt and Semi-solid Slurry	S. Suzuki	[Materials Transactions, Vol. 54, No. 11(2013), pp. 2102-2108]
10	Deformation Behavior of Aluminum Alloy Tube in Semi-Dieless Metal Bellows Forming Process with Local Heating Technique	K. Manabe	[Advanced Materials Research, Vol. 936, (2014), pp. 1742-1746]
11	Fabrication of Monodisperse Particles by Nanoimprinting Using Anodic Porous Alumina Molds	H. Masuda	[J. Vac. Sci. Technol. B, Vol. 32, No. 1(2014), pp. 011802-1-4]
12	Influence of the Initial Texture on Texture Formation of High Temperature Deformation in AZ80 Magnesium Alloy	H. Fukutomi	[Journal of The Japan Institute of Light Metals, Vol.63, No. 6(2013), 212-217]
13	Effects of Fine Particle Peening on Oxidation Behavior of Nickel-Titanium Shape Memory Alloy	J. Komotori	[Materials Transactions, Vol. 55, No. 1(2014), pp. 176-181]
14	Changes in State of Intermetallic Compounds in JIS AC4CH Aluminum Alloy during High Temperature and Short Time Solution Treatment	Y. Nakayama	[Journal of Japan Foundry Engineering Society, Vol. 85, No. 10, pp. 643-650(2013)]
15	Aging Behavior and Microstructure on Aged Excess Mg Type Al-Mg-Si Alloys after HPT Processing	K. Matsuda	[Journal of Japan Institute of Light Metals, Vol. 63, No. 11(2013), pp. 406-412]
16	Effect of Twinning and Detwinning on inelastic Behavior during Unloading in a Magnesium alloy Sheet	H. Takuda	[Materials Science & Engineering A, 583(2013), 232-241]
17	Improved Plastic Anisotropy of Mg-Zn-Ca Alloys Exhibiting High-stretch Formability: a first-principles study	M. Mabuchi	[Acta Materialia, Vol. 65, (2014), pp. 207-214]
18	Interfacial Microstructure between Thick Aluminum Wires and Aluminum Alloy Pads Formed by Ultrasonic Bonding	Y. Takahashi	[Journal of Science and Technology of Welding and Joining, Vol. 18(2013), pp. 103-107]
19	Interfacial Reaction during Dissimilar Friction Stir Lap Welding of Aluminum Alloy to Stainless Steel	A. Hirose	[Materials Science Forum Vols. 794-796(2014), pp. 389-394]
20	Evaluation of Initial Galvanic Corrosion Behavior of Mg-Al Composite with CNTs	K. Kondoh	[Advanced Powder Technology, 24, (2013), 833-837]
21	Effect of Phase Stability on Same Physical and Mechanical Properties in β-Ti Single Crystal for Biomedical Applications	T. Nakano	[Materials Science Forum Vols. 783-786(2014), pp. 1372 to 1376]
22	First-principles Studies on Lattice Constants and Local Lattice Distortions in Solid Solution Aluminum Alloys	K. Higashi	[Computational Materials Science, Vol. 67(2013), pp. 1-10]
23	Formability of Mg-Li Alloy Sheet by Square Cup Deep Drawing	Y. Harada	[Proc. of 8th Pacific Rim International Congress on Advanced Materials and Processing, Ver. CD-R, (2013), pp. 1049-1056]
24	Row of Dislocation Loops as a Vacancy Source in Ultrahigh-Purity Aluminum Single Crystals with a Low Dislocation Density	K. Mizuno	[Transaction of the Materials Research Society of Japan, Vol. 39, No. 2(2014)]
25	Microstructure Observation of Preform for High Performance VGCF/Aluminum Composites	G. Sasaki	[Materials Transactions, 55, 5(2014), 827-830]
26	Effect of Aluminum Carbide on Thermal Conductivity of the Unidirectional CF/Al Composites Fabricated by Low Pressure Infiltration Process	G. Sasaki	[Composites Science and Technology 97(2014)1-5]
27	Study on Improved Photocatalytic Properties of Titanium Oxide by Ejector Method	T. Yoshimura	[Journal of Jet Flow Engineering, 2014, Vol. 30, No. 2, (2014), pp. 4-9]
28	Deep Drawing of Airtight Square Cup by Developed Blank of Aluminum Sheet	N. Hatanaka	[The Japan Institute of Light Metals, Vol. 64, No. 8(2014)]
29	Microstructure and Mechanical Property in Cast AZ91 Magnesium Alloy with Y Addition	K. Nakai	[Material Science Forum, accepted on May 18th(2013)]
30	Effect of Temperature on Solid-state Formation of Bulk Nanograined Intermetallic Al3Ni during High-pressure Torsion	Z. Horita	[Philosophical Magazine, 94(2013), pp. 876-887]
31	Influence of Dislocation-solute Atom Interactions and Stacking Fault Energy on Grain Size of Single-phase Alloys after Severe Plastic Deformation Using High-pressure Torsions	Z. Horita	[Acta Materialia, 69(2014), pp. 68-77]
32	High-pressure Torsion for Fabrication of High-strength and High-electrical Conductivity Al Micro-wires	Z. Horita	[Journal of Materials Science, 49(2014), pp. 6550-6557]
33	Cavitation during High Temperature Deformation in Al-Mg Alloys	H. Toda	[Acta Materialia, Vols.61, (2013), pp. 2403-2413]
34	Grain Boundary Tracking Technique: Four-dimensional Visualization Technique for Determining Grain Boundary Geometry with Local Strain Mapping	H. Toda	[Acta Materialia, Vols.61, (2013), pp. 5535-5548]
35	The True Origin of Ductile Fracture in Aluminum Alloys	H. Toda	[Metallurgical and Materials Transactions A, Vols. 45A, (2014), pp. 765-776]
36	Deformation Behavior of Mg-Y and Mg-Al-Zn Alloy Single Crystals in Compression	S. Ando	[Proceedings of The 8th Pacific Rim International Congress on Advanced Materials and Processing, 2013, pp. 979-985]
37	Alloying Effects on Non-basal Slips in Magnesium Single Crystals	S. Ando	[Proceedings of Materials Science & Technology 2013, 2013, pp. 1449-1454]
38	Tensile Deformation of Magnesium and Magnesium Alloy Single Crystals	S. Ando	[Materials Science Forum, Vols. 783-786(2014), pp. 341-345]
39	Deformation Behavior of Semi-solid Hypereutectic Al-Si Alloy Compressed in the Drop-forge Viscometer	Y. Fukui	[Trans. JSME, Vol. 80, No. 812(2014), DOI:10.1299/transjme.2014smm0081]
40	Effect of Metal Cations on Corrosion Behavior and Surface Film Structure of the A3003 Aluminum Alloy in Model Tap Waters	M. Sakairi	[Journal of Solid State Electrochemistry, 18, 325-332(2014)
41	Corrosion Evaluation of Biodegrable Magnesium Alloys and Improvement of Corrosion Resistance with Calcium Phosphate Coatings	S. Hiromoto	[Journal of The Japan institute of Light Metals, Vol. 64, (2014), pp. 203-210]
42	Structure and Mechanical Properties of Cast Mg-Ca and Mg-Ca-Zr Alloys	Y. Tamura	[Journal of Japan Institute of Light Metals, Vol. 63, No. 8(2013), pp. 279-285]
43	Microstructure and Mechanical Properties of Mg-8Al Alloy Fabricated by Room-Temperature Multi-Directional Forging	H. Miura	[Magazine Letters, Vol. 93(2013), pp. 601-607]
44	Dynamic and Post-dynamic Recrystallization under Hot, Cold and Severe Plastic Deformation Conditions	H. Miura	[Materials Science, Vol. 60(2014), pp. 130-207]
45	Ultrafine Grain Evolution in Mg Alloys, AZ31, AZ61,AZ69 by Multi Directional Forging	H. Miura	[Advanced Materials Science, Vol. 33(2013), pp. 14-34]
46	Effects of Cu or Li Addition and Multi-step Aging Conditions on the Bake-hardenability of an Al-Mg-Si Alloy	S. Hirosawa	[Materials Science Forum Vols.794-796(2014), pp. 1152-1156]
47	Room Temperature Screw Form Rolling of AZ91D Magnesium Alloy through Processing by Extrusion-Torsion Simultaneous Working	M. Furui	[Materials Science Forum, Vol. 783-786, (2014), pp. 375-379]
48	Fe2VAl-Based Thermoelectric Thin Films Prepared by a Sputtering Technique	T. Takeuchi	[Journal of Electronic Materials 43(6), pp. 2157-2164, (2014)]
49	Thermal Rectification in Bulk Material Through Unusual Behavior of Electron Thermal Conductivity of Al-Cu-Fe Icosahedral Quasicrystal	T. Takeuchi	[Journal of Electronic Materials, DOI: 10.1007/s11664-014-3204-4(2014)]
50	Change in Mechanical Strength and Bone Contactability of Biomedical Titanium Alloy with Low Young’s Modulus Subjected to Fine Particle Bombarding Process	T. Akahori	[J. Japan Inst. Metals, Vol. 78, No. 4, (2014), pp. 163-169]
51	Microstructural Evolution and Mechanical Properties of Friction-Stir-Welded Al-Mg-Si Joint	T. Morita	[Materials Science & Engineering A, Vol. 595, (2014), pp. 196-204]
52	ω Transformation in Cold Worked Ti-Nb-Ta-Zr-O Alloys with Low Body-centered Cubic Phase Stability and Its Correlation with Their Elastic Properties	M. Tane	[Acta Materialia, Vol. 61(2013), pp. 139-150]
53	Elastic Properties of an Mg-Zn-Y Alloy Single Crystal with a Long-period Stacking Ordered Structure	M. Tane	[Acta Materialia, Vol. 61(2013), pp. 6338-6351]
54	Elastic Properties of Single-crystalline ω Phase in Titanium	M. Tane	[Acta Materialia, Vol. 61(2013), pp. 7543-7554]
55	Formation of Dillamore Orientation during Accumulative Roll Bonding of {001}<100>Aluminum Single Crystal	K. Kashihara	[Journal of the Japan Institute of Light Metal, Vol. 64, No. 3, (2014), pp. 93-97]
56	Evaluation of Dislocation Density for 1100 Aluminum with Different Grain Size during Tensile Deformation by Using In-situ X-ray Diffraction Technique	H. Adachi	[Accepted in 17 Jul. 2014, Journal of Japan Institute of Light Metals]
57	Hydrogen Induced Bending Deformation of a Thin Plate with Electroless Pd Plating	K. Horikawa	[J. Japan Inst. Metals, Vol. 77, No. 4(2013), pp. 115-120]
58	Heterogeneous Nucleation of Pure Magnesium on Al3Ti, TiC, TiB2 and AlB2 Particles	Y. Watanabe	[Jpn J. Appl. Phys., 52, No. 1, 01AN04(7 pages)(2013)]
59	Grain Refinement Performance of Aluminum Cast Using Machining Chips	Y. Watanabe	[Journal of the Japan Institute of Light Metals, 63, No. 4, 147-153(2013)]
60	Fabrication of Al/Diamond Particles Functionally Graded Materials by Centrifugal Sintered-Casting Method	Y. Watanabe	[Journal of Physics: Conference Series 419, 012002(4 pages)(2013)]
61	Novel Centrifugal Casting Method by Using Machining Chips	Y. Watanabe	[Trans. Mat. Res. Soc. Japan, 38, No. 1, 21-26(2013)]
62	Formation Behavior of Continuous Graded Composition in Ti-ZrO2 Functionally Graded Materials Fabricated by Mixed-Powder Pouring Method	Y. Watanabe	[Journal of Nanomaterials, 2013, 504631(8 pages)(2013)]
63	Grain Refinement of Al Cast by Al5CuTi2, Al22Fe3Ti8 and Al67Ni8Ti25 Intermetallic Compounds with L12 Structure	Y. Watanabe	[Proceedings of the 8th Pacific Rim International Conference on Advanced Materials and Proceeding, TMS(The Minerals, Metals & Materials Society), 2297-2305(2013)]
64	3-Dimentional Microstructural Evaluation of Wear-Induced Layer in Al-Al3Ti Functionally Graded Materials by Serial Sectioning	Y. Watanabe	[Materials Transactions, 54, No. 8, 1274-1280, (2013)]
65	Grain Refinement of As-Cast Pure Al by Cold Rolled Al-Ti Alloy Refiner	Y. Watanabe	[Materials Transactions, 54, No. 9, 1554-1561(2013)]