| 1 |
Highly increased breakdown potential of anodic films on aluminum using a sealed porous layer |
H. Habazaki |
[J. Sold State Electrochemistry, Vol. 22(2018), pp. 2073-2081] |
| 2 |
Ceramic coating of Ti and its alloys using dry processes for biomedical applications |
T. Narushima |
[Interface Oral Health Science 2016, Innovative Research on Biosis-Abiosis Intelligent Interface, Chapter 2(2017) pp. 23-34] |
| 3 |
Effect of test environment on tensile properties of cold-rolled 7075 aluminum alloy |
S. Kuramoto |
[Journal of the Japan Institute of Light Metals, Vol. 68, No. 11(2018)] |
| 4 |
Platelet precipitate in an age-hardening Mg-Zn-Gd alloy |
E. Abe |
[Journal of Alloys and Compounds, 752(2018) 407-411] |
| 5 |
Micron/submicron hybrid topography of titanium surfaces influences adhesion and differentiation behaviors of the mesenchymal stem cells |
T. Hanawa |
[Journal of Biomedical Nanotechnology, Vol. 13, No. 3 (2017), pp. 324-336] |
| 6 |
Dynamic compression properties of porous aluminum with functionally graded pore structures |
T. Utsunomiya |
[Journal of the Japan Institute of Light Metals, Vol. 67, No. 11(2017), pp. 576-581] |
| 7 |
Fabrication of aluminum sandwich panel with functionally graded porous foam consisting of dissimilar aluminum alloys |
T. Utsunomiya |
[Journal of the Japan Institute of Light Metals, Vol. 67, No. 11(2017), pp. 595-596] |
| 8 |
Aluminum alloy foam-filled aluminum tube fabricated by friction stir back extrusion and its compression properties |
T. Utsunomiya |
[Composite Structures, Vol. 183(2018), pp. 416-422] |
| 9 |
Fabrication of bilayer tube consisting of outer aluminum foam tube and inner dense aluminum tube by friction stir back extrusion |
T. Utsunomiya |
[Materials Today Communications,15(2018), pp. 36-42] |
| 10 |
Two-step forming for improvement of forming limit in rotary nosing with relieved die for reduction of tube tip |
T. Kuboki |
[International conference on the Theology of Plasticity, ICTP 2017, Vol. 207, (2017), pp. 1743-1748] |
| 11 |
Preparation of renewable antireflection moth-eye surfaces by nanoimprinting using anodic porous alumina molds |
H. Masuda |
[J. Vac. Sci. Techonol.B, 36, 031802(2018)] |
| 12 |
Microstructure and mechanical properties of Ti-6Al-4V parts build by selective laser melting |
K. Kakehi |
[J. Japan Inst. Met. Mater., Vol. 81, No. 3(2017), pp. 120-126] |
| 13 |
Initial process of continuous dynamic recrystallization in a superplastic Al-Mg-Mn alloy |
E. Sato |
[Journal of The Japan Institute of Light Metals, Vol. 67, No. 4(2017), 95-100] |
| 14 |
Effect of the nitrogen diffusion layer formed by gas blow induction heating nitriding on wear resistance fatigue properties of titanium alloy |
J. Komotori |
[Proceedings 2018, 2, 409; doi:10.3390/ICEM18-05285] |
| 15 |
Quantitative evaluation of eutectic Si phase distributions and effect on mechanical properties in JIS AC4CH aluminum casting alloy |
Y. Nakayama |
[Journal of Materials Transactions, Vol. 59, No. 8, pp. 1317-1325(2018)] |
| 16 |
Hole making process of metal and composite sheets by impact hydraulic pressure |
M. Yamashita |
[Procedia Engineering, Vol. 207, 2017, 1558-1563] |
| 17 |
Surface modification of PEEK and its osteoconductivity and anti-inflammatory properties |
M. Okido |
[J. Biomaterials and Nanobiotechnology, Vol. 9, pp. 233-243, 2018] |
| 18 |
Formation of L12 modified Al2.5Cu0.5Ti phase by heat treatment of spark-plasma-sintered Cu/Al3Ti specimens |
Y. Watanabe |
[Japanese Journal of Applied Physics, 57, 01AF04(8 pages) (2018)] |
| 19 |
Heterogeneous nucleation of α-Al primary crystal on L12 modified Al2.7Ni0.3Ti phase |
Y. Watanabe |
[Japanese Journal of Applied Physics, 57, 01AF08(6 pages) (2018)] |
| 20 |
Grain refinement of pure Al using Al2.5Cu0.5Ti particles with an L12 structure |
Y. Watanabe |
[Journal of Materials Processing Technology, 255, 400-410 (2018).] |
| 21 |
Grain refining of cast aluminum by (Fe1-xVx)3Al heterogeneous nucleation site particles |
Y. Watanabe |
[Journal of Japan Foundry Engineering Society, 90, No. 1, 3-10(2018)] |
| 22 |
Microstructural evolution and enhanced mechanical properties by multi-directional forging and aging of 6000 series aluminum alloy |
H. Miura |
[JILM67(2017)277-283 doi.org/10.2464/jilm.67.277 and translated in Mater. Trans. 59(2018)373-379 doi.org/10.2320/ matertrans. L- M2017856] |
| 23 |
Analyzing the boundary thermal resistance of epitaxially grown Fe2V Al/W layers by picosecond Time-Domain thermoreflectance |
T. Takeuchi |
[Journal of ELECTRONIC MATERIALS, Vol. 47, No. 6 (2018) pp. 3113 to 3114. doi:10.1007/s11664-017-6007-6] |
| 24 |
Role of twinning on the stress and strain behaviors during reverse loading in rolled magnesium alloy sheets |
H. Takuda |
[Materials Science and Engineering A, 725(2018), 8-18] |
| 25 |
An atomistic study of Y segregation at a {1011}-{1012}double twin in Mg |
M. Mabuchi |
[AIP Advances, Vol. 7, (2017), pp. 035308(1)-(11)] |
| 26 |
Multiple self-exothermic reactions for room-temperature aluminum bounding via instantaneous melting |
A. Hirose |
[Materials and Design, Vol. 121(2017) pp. 136-142] |
| 27 |
Effect of silicon content on densification, mechanical and thermal properties of Al-xSi binary alloys fabricated using selective laser melting |
H. Araki |
[Materials Science & Engineering, Vol. A682, (2017), pp. 593-602] |
| 28 |
Tribological property of α-pure titanium strengthened by nitrogen solid-solution |
K. Kondoh |
[Journal of the Japan Society of Powder and Powder Metallurgy, 64, 6(2017) 275-280] |
| 29 |
Formation of roll coating in cold rolling of titanium sheets |
H. Utsunomiya |
[Procedia Engineering, Vol. 207 (2017), pp. 1367-1372] |
| 30 |
Experimental clarification of the cyclic deformation mechanisms of β-type Ti-Nb-Ta-Zr-alloy single crystals developed for the single-crystalline implant |
T. Nakano |
[International Journal of Plasticity Vol. 98 (2017), pp. 27 to 44] |
| 31 |
Evaluation of microstructure by precise measurement f resistivity in pure Ti |
M. Ueda |
[Accepted in Resources Processing, 2018] |
| 32 |
Simultaneous prediction of bendability and deep drawability using orientation distribution function for aluminum alloy sheets |
H. Inoue |
[Materials Transactions, Vol. 59, No.3 (2018), pp. 399-405] |
| 33 |
Surface modification of aluminum alloy by shot lining and laser heating |
Y. Harada |
[Proceedings of the 20th International Symposium on Advances in Abrasive Technology, 2017, Pages 1224-1230] |
| 34 |
Improvement in fatigue life of Ti-6Al-4V alloy by microshot peening and ultrasonic shot peening |
Y. Harada |
[Proceeding of the 20th International Symposium on Advances in Abrasive Technology, 2017, Pages 1178-1183] |
| 35 |
New water jet cavitation technology to increase number and size of cavitation bubbles and its effect on pure Al surface |
T. Yoshimura |
[International Journal of Lightweight Materials and Manufacture, Vol. 1 (2018), pp. 12-20] |
| 36 |
Effect of Oxygen Addition on the Spinodal Decomposition and Hardness of Ti-4at%Mo Alloy |
S. Kobayashi |
[Journal of the Japan Institute of Metals and Materials, J-stage early publication, paper ID: J2017059, (2018)] |
| 37 |
Strengthening of A2024 alloy by high-pressure torsion and subsequent aging |
Z. Horita |
[Materials Science and Engineering A, 704 (2017) pp. 112-118] |
| 38 |
Room-temperature superplasticity in an ultrafine-grained magnesium alloy |
Z. Horita |
[Scientific Reports, 7 (2017) pp. 2662 (9p)] |
| 39 |
Influence of yttrium addition on plastic deformation of magnesium |
S. Ando |
[Materials Transactions, 58, 2017, pp. 1656-1663] |
| 40 |
Corrosion-induced morphological changes and the mechanism of A3003 aluminum alloy in model sea water containing gluconates and zinc ions |
M. Sakairi |
[Journal of The Japan Institute of Light Metals, Vol. 68, No. 1 (2018) 16-21] |
| 41 |
Nanostructural characterization of large-scale porous alumina fabricated via anodizing in arsenic acid solution |
T. Kikuchi |
[Applied Surface Science, 403 (2017) 652-661] |
| 42 |
Advanced hard anodic alumina coatings via etidronic acid anodizing |
T. Kikuchi |
[Surface & Coatings Technology, 326 (2017) 72-78] |
| 43 |
Superhydrophilic and superhydrophobic aluminum alloys fabricated via pyrophosphoric acid anodizing and fluorinated SAM modification |
T. Kikuchi |
[Journal of Alloys and Compounds, 725 (2017) 379-387] |
| 44 |
Fabrication of ordered submicrometer-scale convex lens array via nanoimprint lithography using an anodized aluminum mold |
T. Kikuchi |
[Microelectronic Engineering, 185-186(2018)61-68] |
| 45 |
Mirror-finished superhydrophobic aluminum surfaces modified by anodic alumina nanofibers and self-assembled monolayers |
T. Kikuchi |
[Applied Surface Science,440 (2018) 506-513] |
| 46 |
Strength evaluation on the site of hydrogen in Al-Mg-Zn alloys by ab initio calculation |
T. Nagano |
[KEIKINZOKU, Vol. 68, No. 4 (2018) pp. 189 to 193] |
| 47 |
Calcium phosphate coatings of magnesium alloys for biomedical application |
S. Hiromoto |
[Materia Japan vol. 56(2) (2017) pp. 62-69] |
| 48 |
Horizontal twin roll strip casting of ADC12, A3003 and A7075 |
S. Nishida |
[Abstract Proceeding Book MTAR 2017, (2017), pp. 92] |
| 49 |
Effect of Eutectic Behavior on Yield Stress of Mg-La-Zr Alloys |
Y. Tamura |
[Materials Transactions, Vol. 59, No. 1(2018), pp. 66-71] |
| 50 |
In vitro corrosion properties of Mg matrix in situ composites fabricated by spark plasma sintering |
E. Kobayashi |
[Metals, Vol. 7, No. 9 (2017), No. 358] |
| 51 |
Strengthening of Mg-Al-Ca die-cast alloy with fine C15-Al2Ca precipitates |
Y. Terada |
[Journal of Japan Institute of Metals and Materials, 82(2018), pp. 94-101] |
| 52 |
Evaluation of corrosion resistance of implant-use Ti-Zr binary alloys with a range of compositions |
Y. Tsutsumi |
[Journal of Biomedical Materials Research Part B: Applied Biomaterials, Vol. 106B, No. 1(2018), pp. 73-79] |
| 53 |
Examination of a low-profile spinal implant |
N. Hisamori |
[International Journal of Automation Technology (IJAT), Vol. 11, No. 6 2017, pp. 895-901] |
| 54 |
Preparation of nanoporous alumina hollow spheres with highly ordered hole arrangement |
T. Yanagishita |
[RSC Adv., 8, 2014(2018)] |
| 55 |
Effect of cathodic current on the structural features of oxide films formed by AC anodization of aluminum |
H. Asoh |
[J. Electrochem. Soc., Vol. 164, (2017), pp. C939-C944] |
| 56 |
Effect of specimen size and shape on strength and deformation of high-purity aluminum single-crystal micropillars |
N. Takata |
[Journal of The Japan Institute of Light Metals Vol. 68, No. 5 (2018), pp. 250-256] |
| 57 |
Tailoring of morphology and crystalline structure of nanoporous TiO2-TiO-TiN composite films for enhanced capacity as anode materials of lithium-ion batteries |
S.-Z. Kure-Chu |
[Journal of the Electrochemical Society, Vol. 165, No. 3 (2018), pp. A477-A486] |
| 58 |
Effects of forging temperature on Al3Ti particle distribution in Al-Al3Ti multi-phase materials deformed by multi-directional forging |
H. Sato |
[J. Jpn. Inst. Light Met., Vol. 68, No. 1, (2018) pp. 2-8] |
| 59 |
Formation of hydroxyapatite layer on Ti-6Al-4V ELI alloy by fine particle peening |
T. Akahori |
[Int. J. of Automation Technology, Vol. 11, No. 6 (2017) pp. 915-924] |
| 60 |
Effects of aging on mechanical properties and microstructure of multi-directionally forged 7075 aluminum alloy |
M. Kobayashi |
[Materials Science and Engineering A 700 (2017) 220-225 doi.org/10.1016/j. msea. 2017. 06. 017] |
| 61 |
Investigation of three-dimensional morphology changes of the eutectic Si-particles affected by trace P and Sr in Al-7%Si cast alloys by means of synchrotron nano-tomography |
M. Kobayashi |
[Materials Characterization, 130(2017) 237-242] |
| 62 |
Transition to long period stacking ordered structures in Mg85Gd9Zn6 alloys from amorphous ribbons examined by synchrotron radiation scatting: comparison with Mg85Y9Zn6 alloys |
H. Okuda |
[Scripta Materialia, Vol. 139 (2017), pp. 26-29] |
| 63 |
Time-dependent springback of a commercially pure titanium sheet |
T. Hama |
[Procedia Engineering, 207 (2017), 263-268] |
| 64 |
Joining of anodized and stacked aluminum sheets by copper electrodeposition: nano-anchor effect |
M. Hakamada |
[Materials Transactions, Vol. 59, No. 2 (2018), pp. 324-326] |
| 65 |
Variation of tensile and bending rigidities of a duplex embossed steel sheet by small uniaxial tensile deformation |
T. Iizuka |
[Journal of Materials Processing Technology, Vol. 261, (2018), pp. 123-139] |
| 66 |
Analysis of vacancy-solute clusters in aluminum alloys by first-principles |
M. Mizuno |
[Positron Science, Vol. 10 (2018), pp. 13-19] |
| 67 |
Grain boundary fracture of Al-Mg base alloys containing traces of sodium |
K. Horikawa |
[COM 2017, Conference of Metallurgists, Proceedings ISBN:978-1-926872-36-0. Aug. 8, 2017 by the Canadian Institute of Mining, Metallurgy and Petroleum | www.metsoc.org] |
| 68 |
Strain-rate dependence of deformation behavior of LPSO-phases |
K. Hagihara |
[Materials Letters Vol. 214(2018), pp. 119 to 122] |
| 69 |
Reduction in axial forging load by low-frequency torsional oscillation in cold upsetting |
R. Matsumoto |
[The International Journal of Advanced Manufacturing Technology, Vol. 93, No. 1-4(2017), pp. 933-943] |
| 70 |
Insignificant elastic-modulus mismatch and stress partitioning in two-phase Mg-Zn-Y alloys comprised of α-Mg and long-period stacking ordered phases |
M. Tane |
[Materials Science and Engineering A, Vol. 710 (2018), pp. 227-239] |
| 71 |
Dissimilar metal joining of A5052 aluminum alloy and AZ31 magnesium alloy using laser brazing |
T. Ogura |
[Materials Science Forum, 879(2017), pp. 2532-2536] |
| 72 |
Texture and mechanical properties of Al-Mg alloy with unimodal and bimodal grain-structures formed by accumulative roll bonding and annealing |
K. Kashihara |
[Materials Transactions, 59(2018), pp. 1147-1155] |
| 73 |
Statistical fatigue properties and small fatigue crack propagation in bimodal harmonic structured Ti-6Al-4V alloy under four-point bending |
S. Kikuchi |
[Materials Science and Engineering A, Vol. 711, (2018), pp. 29-36] |
| 74 |
Fractographic analysis of fatigue crack initiation and propagation in CP titanium with a bimodal harmonic structure |
S. Kikuchi |
[Materials Science and Engineering A, Vol. 716, (2018), pp. 228-234] |
| 75 |
Change of electrical resistivity with martensite transformation of Ti-42 mass%Nb alloy |
Y. Takemoto |
[Journal of The Japan Institute of Metals and Materials, Vol. 82, No. 7(2018), pp. 256-261] |
| 76 |
Compressive behavior of open-cell titanium foams with different unit cell geometries |
K. Kitazono |
[Materials Transactions, Vol. 58, No. 11(2017), pp. 1587 to 1592] |
| 77 |
Atomic scale HAADF-STEM study of η' and η1 phases in peak-aged Al-Zn-Mg alloys |
K. Matsuda |
[Journal of Materials Science, Vol. 53, (2018), pp. 4598-4611] |
