| 1 |
Diffusion-controlled Growth of TiO2 Mesoporous Anodic Films in Hot Phosphate/glycerol Electrolytes |
H. Habazaki |
[Electrochemistry, Vol. 86(2018), pp.184-189] |
| 2 |
On Physical Basis of Larson-Miller Constant of 20 |
H. Sato |
[International Journal of Pressure Vessels and Piping 159 (2018) 93-100] |
| 3 |
Surface vortex formation and free surface deformation in an unbaffled vessel stirred by on-axis and eccentric impellers |
V. Komarov |
[Chemical Engineering Journal, 367, (2019), 25-36] |
| 4 |
Visible-light-responsive antibacterial activity of Au-incorporated TiO2 layers formed on Ti-(0-10) at %Au alloys by air oxidation |
T. Narushima |
[Journal of Biomedical Materials Research Part A, 107A (2019) 991-1000] |
| 5 |
Material flow in lap joint of dissimilar metallic foils by friction stir diffusion bonding with micro indentation |
Y. Takayama |
[Materials Science Forum, Vol. 941, (2018), pp. 1450-1456] |
| 6 |
Effect of Artificial Sand Filling on Appearance and Dimensional Accuracy of Casting in Expendable Pattern Casting Process |
S. Koroyasu |
[2018’ 24th Annual Conference of Lost Foam, V Method and Full Mold Casting Technology in Longyan, China, (2018), pp. 31-36] |
| 7 |
Experimental Realization of a Semiconducting Quasicrystalline Approximant in Al-Si-Ru System by Band Engineering |
K. Kimura |
[Physical Review Materials Vol. 3, (2019), pp. 061601(R)-1-5] |
| 8 |
AE Classification in LPSO-Mg Extruded Alloys Using in-situ Observation and Machine Learning |
M. Enoki |
[PROGRESS in ACOUSTIC EMISSION XIX, (2018), pp. 301-304] |
| 9 |
Adhesion and Differentiation Behaviors of Mesenchymal Stem Cells on Titanium with Micrometer and Nanometer-scale Grid Patterns Produced by Femtosecond Laser Irradiation |
T. Hanawa |
[Journal of Biomedical Materials Research Part A, Vol. 106, No. 10 (2018), pp. 2735-2743] |
| 10 |
Forming of Aluminum Foam Using Steel Mesh as Die during Foaming of Precursor by Optical Heating |
T. Utsunomiya |
[Optics and Laser Technology, Vol. 108(2018), pp. 496-501] |
| 11 |
Preparation of Polymer Nanofibers with Controlled Diameters by Continuous Spinning Using Ordered Anodic Porous Alumina as Spinneret |
H. Masuda |
[Chem. Lett. 2019, 48, 86-89] |
| 12 |
AC-bipolar Anodization of Aluminum: Effects of Frequency on Thickness of Porous Alumina Films |
H. Asoh |
[J. Electrochem. Soc., Vol. 165, (2018), pp. C295-C301] |
| 13 |
Anodization of Al in Neutral Oxalate Solution to Form Unusually Fine Nanoporous Film |
K. Nishio |
[Chemistry Letters, Vol. 48, (2019), pp. 1126-1129] |
| 14 |
Interfacial Microstructural Evolution, Diffusion Inhibition and Fracture Behavior of Nb Interlayer Inserted Si3N4/Ti Joints Brazed with AgCuTi Filler Alloy |
E. Sato |
[Materials Science & Engineering A, doi.org/10.1016/j.msea.2019.138096] |
| 15 |
Effect of Pre-treatment with Fine Particle Peening on Surface Properties and Wear Resistance of Gas Blow Induction Heating Nitrided Titanium Alloy |
J. Komotori |
[Surface & Coatings Technology, 359, (2019), 476-484] |
| 16 |
Improvement of High-rate Discharging Performance of LiFePO4 Cathodes by Forming Micrometer-sized through-holed Electrode Structures with a Pico-second Pulsed Laser |
F. Matsumoto |
[Electrochimica Acta, 296, (2019), 27-38] |
| 17 |
Nucleation of Bar-Like α-Precipitates in a Ti-20mass%Mo Alloy under External Stress |
C. Watanabe |
[Journal of Japan Institute Metals and Materials, Vol. 83, No. 2 (2019) pp. 59-64] |
| 18 |
Effect of Strain-Rate on Forming Limit in Biaxial Stretching of Aluminum Sheet |
M. Yamashita |
[Procedia Manufacturing, Vol. 15 (2018) 877-883] |
| 19 |
Fragmentation of Platelet Shaped β-AlFeSi Intermetallic Compound Particles in Al-7 mass%Si-1 mass%Fe Alloy by Equal-Channel Angular Pressing, Multi-Directional Forging, Symmetric Rolling and Asymmetric Rolling |
Y. Watanabe |
[J. Jpn. Inst. Light Met., 68, No. 12, 673-676(2018)] |
| 20 |
Joining of AlN and Al with Compositional Graded Layer by Centrifugal Mixed-Powder Method |
Y. Watanabe |
[Materials Science Forum, 941, 1978-1983(2018)] |
| 21 |
Fabrication of Grain Refiners with a High Volume Fraction of Al2.7Fe0.3Ti Heterogeneous Nucleation Site Particles by Spark Plasma Sintering |
Y. Watanabe |
[Japanese Journal of Applied Physics, 58, SAAC04(9pages) (2019)] |
| 22 |
Formation of Compositional Gradient in Al/SiC FGMs Fabiricated Under Huge Centrifugal Forces Using Solid-Particle and Mixed-Powder Methods |
Y. Watanabe |
[Ceramics International, 45, No. 7, Part B, 9444-9453(2019)] |
| 23 |
An approach for Room-Temperature Multi-Directional Forging of Pure Titanium for Strengthening |
H. Miura |
[Materials Science & Engineering A 731(2018) 603-608] |
| 24 |
Microstructure and Mechanical Properties in Multi-Directionally Forged 7075 and 7N01 Aluminum Alloy |
H. Miura |
[Journal of The Japan Institute of Light Metals, Vol. 68, No. 7(2018), 339-345] |
| 25 |
Microstructure and Mechanical Properties of Plates Warm Extruded AZ80Mg Alloy Fabricated by Multi-Directional Forging in Advance |
H. Miura |
[Procedia Manufacturing, 15, (2018), 1533-1540] |
| 26 |
Phonon Scattering at the Interfaces of Epitaxially Grown Fe2VAl/W and Fe2VAl/Mo Superlattices |
T. Takeuchi |
[Journal of Applied Physics 125, 225101(2019). doi:10.1063/1.5080976] |
| 27 |
Grain Refinement and Age Precipitation in Aluminum Alloys Using ARB Process |
N. Tsuji |
[Journal of The Japan Institute of Light Metals, Vol. 69, No. 3(2019), 149-156] |
| 28 |
Formation Mechanism of Ultrafine Grained Microstructures: Various Possibilities for Fabricating Bulk Nanostructured Metals and Alloys |
N. Tsuji |
[Materials Transactions, 60(2019), No. 8, in press] |
| 29 |
Texture and Mechanical Properties of Al-Mg Alloy with Unimodal and Bimodal Grain-Structures Formed by Accumulative Roll Bonding and Annealing |
N. Tsuji |
[Materials Transactions, Vol. 59, Issue 7(2018), pp. 1147-1155] |
| 30 |
Relationship between Intermetallic Compound Layer Thickness with Deviation and Interfacial Strength for Dissimilar Joints of Aluminum Alloy and Stainless Steel |
A. Hirose |
[Materials Science and Engineering: A, Vol.735, (2018), pp. 361-366] |
| 31 |
Contact Resistance between Roll and Titanium Sheet during Cold Rolling |
H. Utsunomiya |
[CIRP Annals - Manufacturing Technology, Vol. 68 (2019), pp. 305-308] |
| 32 |
Additive Manufacturing of Dense Components in Beta-Titanium Alloys with Crystallographic Texture from a Mixture of Pure Metallic Element Powders |
T. Nakano |
[Materials & Design, Vol. 173 (2019), 107771] |
| 33 |
Effects of Mo Addition on Deformation Behavior of Metastable Beta-Type Ti-Mn Single Crystals |
H. Yasuda |
[Materials Science Forum, 941(2018), 1360-1365] |
| 34 |
Mechanical Properties of Additively Manufactured Porous Titanium with Sub-Millimetre Structural Units |
M. Ueda |
[Materials Transactions, (2019), doi:10. 2320/ matertrans.ME201916] |
| 35 |
Simultaneous Prediction of Bendability and Deep Drawability Based on Orientation Distribution Function for Polycrystalline Cubic Metal Sheets |
H. Inoue |
[Materials Science Forum, Vol. 941, (2018), pp. 1468-1473] |
| 36 |
Reduction of Impurity Contents in Aluminum Plates Electrodeposited from a Dimethylsulfone-Aluminum Chloride Bath |
Y. Takigawa |
[Journal of Alloys and Compounds, Vol. 783 (2019), pp. 919-926] |
| 37 |
Ductile Electrodeposited Al from a Dimethylsulfone Bath with Trace Amounts of Tin Chloride |
Y. Takigawa |
[Materials Letters, Vol. 244 (2019), pp. 192-194] |
| 38 |
Al-8Mg Alloy with High Strength and High Ductility by Addition of a Grain Boundary Strengthening Element |
Y. Takigawa |
[Materials Letters, Vol. 245 (2019), pp. 218-221] |
| 39 |
Effects of Different Shot Peening Treatments on Fatigue Life in Ti Alloy |
Y. Harada |
[Materials Science Forum, Vol. 941, 2018, pp. 908-913] |
| 40 |
Effect of Processing Conditions on Microstructure and Thermal Conductivity of Hot-Extruded Aluminum/ Graphite Composites |
Z-C. Chen |
[Materials Transactions, 60(1), (2019), 136-143] |
| 41 |
Evaluation of Carbon Fiber Distribution in Unidirectional CF/Al Composites by Two-Dimensional Spatial Distribution Method |
G. Sasaki |
[J. Korean Soc. Industry. Convergence 21(1), (2018) pp. 29-36] |
| 42 |
Effect of Fe Addition on Heat-Resistant Aluminum Alloys Produced by Selective Laser Melting |
H. Nakashima |
[Metals, Vol. 9, No. 4, (2019), 468. doi:10.3390/met9040468] |
| 43 |
Short Crack Growth Behavior and its Transitional Interaction with 3D Microstructure in Ti-6Al-4V |
H. Toda |
[Materials Science & Engineering A 738 (2018), pp. 229-237] |
| 44 |
Influence of Hydrogen on Strain Localization and Fracture Behavior in Al-Zn-Mg-Cu Aluminum Alloys |
H. Toda |
[Acta Materialia, Vol. 159 (2018), pp. 332-343] |
| 45 |
Effects of Cerium Addition on Non-basal Slip in Magnesium Single Crystals |
S. Ando |
[Journal of The Japan Institute of Light Metals, 69, 2019, pp. 125-127] |
| 46 |
Effects of Cerium Addition on Fatigue Fracture Behavior of Magnesium Single Crystals |
S. Ando |
[Journal of The Japan Institute of Light Metals, 69, 2019, pp. 128-130] |
| 47 |
Auger Electron Spectroscopic Analysis of Corrosion Products Formed on A3003 Aluminum Alloy in Model Fresh Water with Different Zn2+ Concentration |
M. Sakairi |
[Surface and Interface Analysis, Special Issue, (2019) 1-7] |
| 48 |
Development of α+β-type biomedical Ti-Nb alloys with high oxygen content |
K. Ueda |
[Proceedings of the 14th World Conference on Titanium (2019) ]
|
| 49 |
High-temperature Creep Mechanism of Dual Ductile-phase Magnesium Alloy with Long-period Stacking Ordered Phase |
H. Takagi |
[Materials Transactions, 60(2019), 503-512] |
| 50 |
Resistance Spot Welding of SUS304/CP-Ti Plates Using Inserted Stacking Metal Foils with Zr50Cu40Al10 Supercooling Alloy Composition |
T. Yamamoto |
[Journal of The Society of Materials Science Japan, Vol. 68, No. 3 (2019), pp. 199-204] |
| 51 |
Dislocation Analysis of a Mg-Al-Ca Alloy by Transmission Electron Microscopy |
Y. Terada |
[Journal of the Japan Institute of Light Metals, 68 (2018), pp. 552-554] |
| 52 |
Three-Dimensional Morphology of C15-Al2Ca Precipitates in a Mg-Al-Ca Alloy |
Y. Terada |
[Journal of Japan Institute of Metals and Materials, 83(2019), pp. 193-197] |
| 53 |
Effect of Magnesium Content on Surface Pattern of Al-Mg Alloy Stripes Fabricated by Vertical-Type High-Speed Twin-Roll Casting |
Y. Harada |
[Journal of Japan Foundry Engineering Society, Vol. 91, No. 1(2019), pp. 21-27] |
| 54 |
Improvement of Corrosion Resistance and Strength for Al Alloys Using Steam Process |
A. Serizawa |
[ALUTOPIA, Vol. 48, NO. 4(2018), pp. 5-10] |
| 55 |
Selective Through-Holing of Anodic Porous Alumina Membranes in Large Sample Area |
T. Yanagishita |
[RSC Adv., 2018, 8, 38455-38460] |
| 56 |
Effect of Heat-Treatment Conditions on Microstructure and Shape Memory Properties of Ti-4.5Al-3V-2Fe-2Mo Alloy |
H. Tobe |
[Proceedings of the International Conference on Martensitic Transformations: Chicago, Springer, Cham, (2018), pp. 271-274] |
| 57 |
Effect of Hydrogen and Strain rate on Mechanical Properties of High-Zn Al-Zn-Mg Base Alloys in Micro-Indentation |
H. Yamada |
[Journal of The Japan Institute of Light Metals, Vol. 68, No. 11 (2018), 610-614] |
| 58 |
Preparation of High Purity Magnesium Sheet by Vacuum Distillation and Plastic Working |
M. Inoue |
[The Japan Magnesium Association of Magnesium, Vol. 47, No. 7, (2018), pp. 1-5] |
| 59 |
Fragmentation Process of Platelet Al3Ti Particles in Compressed Al-Al3Ti Alloy Observed by Serial Sectioning and EBSD Analysis |
H. Sato |
[Mater. Res. Express 6 (2019) 096575 (8pages)]
|
| 60 |
Three-Dimensional Microstructural Analysis of Fragmentation Behavior of Platelet Al3Ti Particles in Al-Al3Ti Composite Deformed by Equal-Channel Angular Pressing |
H. Sato |
[Mater. Charact., Vol. 144, (2018) pp. 305-315] |
| 61 |
Observation of Morphology Changes of Fine Eutectic Si phase in Al-10%Si Cast Alloy during Heat Treatment by Synchrotron Radiation Nanotomography |
M. Kobayashi |
[Materials, Vol. 11, No, 8 (2018), 1308] |
| 62 |
Two-dimensional Anomalous Small-angle X-ray Scattering Measurements at the K Absorption Edge of Magnesium for Nanostructure Analysis in Concentrated Al-Mg Binary Alloys |
H. Okuda |
[Applied Physics Express, Vol. 12(2019), Article Number 075503-1] |
| 63 |
Crystal-plasticity Finite-element Simulation of Time-dependent Springback in a Commercially-pure Titanium Sheet |
T. Hama |
[Journal of Physics: Conf. Series, 1063 (2018), 012122] |
| 64 |
Trials to Evaluate Bulging Formability of Duplex Embossed A1050-O Sheet Using Erichsen Test |
T. Iizuka |
[AIP Conference Proceedings 2113 (2019), No. 160014(6pages)] |
| 65 |
Cutting Performance in Threading Turning and Grooving Turning of Ti-6Al-4V Alloy with a High-Pressure Coolant Supply |
T. Wada |
[Proceedings of 2019 IEEE 10th International Conference on Mechanical and Aerospace Engineering pp. 507-512]
|
| 66 |
Improvement of Corrosion Resistance of AA2024-T3 Using Femtosecond Laser Peening without Protective and Confining Medium |
T. Sano |
[Corrosion Science, Vol. 143 (2018) pp. 46-55] |
| 67 |
Interfacial in-situ Al2O3 Nanoparticles Enhance Load Transfer in Carbon Nanotube (CNT)-reinforced Aluminum Matrix Composites |
J. Umeda |
[Journal of Alloys and Compounds 789 (2019) 25-29]
|
| 68 |
Formation of Skin Surface Layer Aluminum Foam by Friction Stir Powder Incremental Forming |
R. Matsumoto |
[The International Journal of Advanced Manufacturing Technology, Vol. 99, No. 5-8(2018), pp. 1853-1861] |
| 69 |
Diffusionless Isothermal Omega Transformation in Titanium Alloys Driven by Quenched-in Compositional Fluctuations |
M. Tane |
[Physical Review Materials Vol. 3 (2019) 043604]
|
| 70 |
Effects of Titanium Interlayer on Dissimilar Joining between Aluminum Alloy and Magnesium Alloy Using Laser Brazing |
T. Ogura |
[Quarterly Journal of the Japan Welding Society, 36, 4 (2018), pp. 247-252] |
| 71 |
Crystallographic Texture Formation of Beta-type Ti-15Mo-5Zr-3Al Alloy through Selective Laser Melting |
T. Ishimoto |
[Journal of Smart Processing, Vol, 7(2018), pp. 229-232] |
| 72 |
Effects of {332}<113>Deformation Twinning on Fatigue Behavior of Ti-Mn System Alloys |
K. Cho |
[Materials Transactions, Vol. 60, No. 9, (2019), doi:10.2320/matertrans.ME201919] |
| 73 |
Change in Microstructures and Mechanical Properties during Annealing of AZ31F Magnesium Alloy Multi-directionally Forged under Decreasing Temperature Conditions |
K. Kashihara |
[Journal of the Japan Institute of Light Metals, 69(2019), 228-234] |
| 74 |
Fabrication of Biodegradable Materials with High Strength by Grain Refinement of Mg-0.3 at.% Ca Alloys |
N. Ikeo |
[Materials Letters, Vol. 223 (2018), pp. 65-68] |
| 75 |
Fabrication and Characterization of Mg–0.2 at% Ca/α-tricalcium Phosphate Composites |
N. Ikeo |
[Materials Letters, Vol. 241 (2019), pp. 96-99] |
| 76 |
Martensitic Transformation Induced in Ti-15V-7Al Alloy at Low and High Temperatures |
Y. Takemoto |
[Journal of The Japan Institute of Metals and Materials. Vol. 82, No. 8 (2018), pp. 307-313] |
| 77 |
Evaluation of Effective Thermal Conductivity of Metal Matrix Composites by Using Image-based Calculation |
K. Sugio |
[Materials Science Forum, Vol. 941 (2018), pp. 1939-1943] |
| 78 |
Fatigue Strength Improvement of Aluminum Alloy by Cavitation Processing |
K. T. Shimamoto |
[International Journal of Scientific and Technical Research in Engineering, Vol. 3, Issue 7(2018), pp. 46-51] |
| 79 |
Fabrication of the Beta-titanium Alloy Rods from a Mixture of Pure Metallic Element Powders via Selected Laser Melting |
M. Todai |
[Materials Science Forum Vol. 941 (2018) 1260-1263]
|
| 80 |
Hydrogen Embrittlement of an Al-Zn-Mg-Cu Series Alloy with High Zn-content in Humid Air |
T. Manaka |
[Journal of The Japan Institute of Light Metals, Vol. 68, No. 11 (2018), 615-620] |
| 81 |
Orientation Dependence on Fatigue Fracture Behavior in Uniaxial Fatigue Tests of Pure Mg Single Crystals |
H. Kitahara |
[Materials Transactions, 59, 2018, pp. 1739-1746] |
| 82 |
Tensile Fracture Behavior in Wrought Magnesium Alloy Fabricated by Multi-Directional Forging Technique |
A.Takahashi |
[International Journal of Innovations in Engineering and Technology (IJIET) Vol. 13, (2019), pp. 117-123] |
| 83 |
Change of LPSO Phases Morphology in Extruded Mg96Zn2Y2 Alloy Joints during Ultrasonic Spot Welding Process |
Y. Higashi |
[Transactions of the Materials Research Society of Japan,43[5] (2018), 263-266] |
| 84 |
Effect of Post Heat Treatment on Tensile Strength of Dissimilar Aluminum Alloy Joints Manufactured through Powder Bed Fusion Process |
K. Kitazono |
[Journal of the Japan Institute of Light Metals, Vol. 69, No. 6(2019), pp. 309-311] |
| 85 |
Development of High-strength Bolt Material of Al-Mg-Si Alloy by ECAP and Various Aging Treatments |
S. Hirosawa |
[Materials Transactions, 60 (2019), pp. 1680-1687] |
| 86 |
The Influence of Cold Rolling on the Hydrogen Embrittlement Resistance in Al-8%Zn-2%Mg-2%Cu-0.15%Zr Alloy |
S. Kuramoto |
[Journal of the Japan Institute of Life Metals, Vol, 69, No. 6(2019), pp. 312-314] |
| 87 |
Influence of Microstructure Adjacent of Grain Boundary on Intergranular Cracking in Al-Mg-Si Alloys |
G. Itoh |
[Journal of the Japan Institute of Light Metals, Vol. 68, No. 12(2018), pp. 667-672] |
| 88 |
Hot Spinning Formability of Aluminum Alloy Tube |
J. Kobayashi |
[Procedia Manufacturing, Vol. 15(2018), pp. 1263-1269] |
| 89 |
Effects of Source of Hydrogen Entry on Hydrogen Embrittlement Sensitivity of Al-Zn-Mg Base Alloys with High Amount of Zinc |
K. Horikawa |
[J. JILM, Vol. 68, No. 11(2018), 603-609] |
